Teka TB 600 Switching the Hotplate OFF, Residual Heat Indicator, Switching the Appliance OFF

Page 24

GB

press) and to increase the power (touch when the hotplate is already switched on).

The power sensor needs to be touched wi- thin 5 seconds after choosing the hotplate, or the hotplate will switch off and will have to be enabled again.

Sensors and are repetitive, so if you keep your finger on them, they go up or down in 0.5-second intervals.

Only one hotplate can be selected at a time (2), which means that only one deci- mal point (13) will be lit up.

Please note:

Before operating a hotplate, it needs to be selected. When you want to use a hotplate, check that the corresponding luminous point (13) is lit up.

To turn a hotplate up to full power quickly: Once the hotplate has been se- lected, touch sensor (4) once, and the hotplate will be switched on to full power.

SWITCHING THE HOTPLATE OFF

1 The hotplate must have already been se- lected. The corresponding decimal point (13) must be lit.

2 Use sensor (4) to decrease the power to level 0. The hotplate will automatically switch off.

To turn it off quickly: By touching sen- sors and (4/5) simultaneously, the hotplate will be turned off quickly.

RESIDUAL HEAT INDICATOR

On the hotplate's power indicator, a H will appear when the surface of the glass in this area reaches a temperature at which there is a risk of burning. When this risk no

longer exists, the indicator light will go out (if the hob is disconnected), or a 0 will show if the hob is still connected.

Switch the hotplate off before you have fi- nished cooking if you wish to take advan- tage of the residual heat and thus save electricity.

Please note: If there is a power cut while the H is turned on, and then the power comes straight back on again, the residual heat indicators will not come back on even if the cooking surfaces are still hot. You should bear this in mind.

SWITCHING THE APPLIANCE OFF

The appliance can be switched off at any time by touching the general on/off sensor In Standby mode, a H will appear in the areas that are hot. None of the other hot-

plate displays will light up.

Double and Triple Circuit

Hotplates (except on TB 600, TT 600, TR 600 and TM 601)

Double and triple circuit hotplates offer the option of using either the inside ring or the outside rings as well, depending on the size of the pan.

CONNECTING / TURNING ON THE DOUBLE AND TRIPLE HOTPLATE

1 The corresponding hotplate must be se- lected - the decimal point (13) must be lit up.

2 Select the power you want (between 1 and 9) using sensor or (4/5).

3 Touch the double hotplate sensor (6) to activate the second circuit. When the pilot (10) comes on, it is in operation.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Ceramic Hobs Contents / Inhalt / Table des Matières / Spis treœci Installation PrésentationInformations Techniques Utilisation ET EntretienModel VTN DC Modell VTN DCModèle VTN DC GB Model VT CMGB Model VT DUAL.1 DE Modell VT DUAL.1FR Modèle VT DUAL.1 Model VT CM Inox HalogenModel VTC DC Modell VTC DCModèle VTC DC Model VTC BModel VR Modell VRModèle VR Model TTModel VT TC Model TR Modell VT TCModèle VT TC Modell TRGB Model TT DE Modelle TTFR Modèle TT GB Models TR 640 and TTModel TT 600, TR 600 and TB Model TC Modell TT 600, TR 600 und TBModèle TT 600, TR 600 et TB Modelle TCModel TR 735 AB Model TM Modell TR 735 AB Modell TMModèle TR 735 AB Modèle TMModel TM Model TR Modell TM Modell TRModèle TM Modèle TR Guide to Using the Instructions Booklet Safety instructionsGB Installation Positioning the hobsFixing the hob See figs ModelsConnecting the electricity Ceramic hobs with controlsPositioning the oven Joining the hob to the oven Or the control panelConnecting the gas Model VT DUAL.1Rear view of the Control Panel Gas conversion Hob dimensions ConfigurationUnit ElectricsGas Characteristics Common to ALL Models Characteristics of the VT DUAL.1Technical details Special requirements Before first use Touch control user InstructionsSwitching the Appliance on Selecting the Hotplate to be Switched onModels TR 640, TT 640, TR 620, TT 620 and TM Switching the Hotplate OFF Residual Heat IndicatorSwitching the Appliance OFF Connecting / Turning on the Double and Triple HotplateDisconnecting / Turning OFF the Double Hotplate Locking the Hobs SensorsModels TT 630, TC 620 and TR Unlocking for cooking only models shown in figureSafety disconnection Cancelling the locking functionSwitching HEAT-UP Function on Heat-up function Automatic cooking startTimer Function Modifying the Power Level DU- Ring HEAT-UP FunctionSwitching HEAT-UP Function OFF Switching on the clockDisconnecting the clock Quick switch-offViewing / Changing the programmed time Models TC 620, TR 735 AB and TRClock as a Countdown timer Switching on the counterChanging the programmed time Models TT 640 and TRPower surges Switching off the counterCeramic hobs with controls Instructions Double Circuit InstructionsResidual Heat Indicators Anti-accidental turn system On gas controlsIgniting the burners Suggestions for using the burners effectively Advice on using the hotplates effectively Cleaning and care the burnersMantaining the VT DUAL.1 Cleaning and care Cleaning and Care the GlassRecommended Cleaning Products Light soilingWhen the glass’ colour changes Cleaning and Care the FrameMessage ER 25 and the beeping signal Neither the hotplates nor the pilot lights are workingPan is sticking to the glass Message ER 21 on the control and subsequent disconnectionGas burners are not lighting Gas burners are making the pans dirtyTeka Group Teka Industrial, S.A Teka Küchentechnik GmbH
Related manuals
Manual 38 pages 12.62 Kb

TT 640, TT 620, VT CM, VT DUAL., TT 600 specifications

Teka is a renowned brand in the kitchen appliance industry, known for its innovative and high-quality products. Among its diverse offerings, several models stand out for their advanced features and user-friendly characteristics: the VTN DC, TB 600, TR 620, VR 622, and TT 620. Each of these models is designed to enhance the cooking experience, making it more efficient and enjoyable.

The Teka VTN DC is a versatile kitchen appliance that combines multiple functions, allowing users to steam, grill, and bake all in one device. Its intelligent control panel simplifies the selection of cooking modes, while the efficient heating system ensures that food is cooked evenly. The VTN DC is also designed with energy efficiency in mind, providing significant savings on utility bills while maintaining excellent cooking performance.

Next is the Teka TB 600, an appliance known for its sleek design and exceptional baking capabilities. This oven features advanced convection technology, which distributes heat evenly throughout the cooking chamber, ensuring that every dish is cooked to perfection. Additionally, the TB 600 comes with a range of preset cooking programs, making it easy for users to choose the optimal settings for various types of meals. Its intuitive touchscreen interface adds to the user-friendly experience.

The Teka TR 620 is a powerful and stylish range that includes gas hobs and an electric oven, catering to the needs of diverse cooking styles. It features precise temperature control and multiple burner options, allowing for simultaneous cooking of multiple dishes. The TR 620 is also built with safety features, including flame failure devices, providing peace of mind for users during meal preparation.

For those who prioritize versatility, the Teka VR 622 is a standout product. This model offers a combination of a microwave and a convection oven, giving users the flexibility to cook quickly or with precision. With its multiple cooking modes and easy-to-clean interior, the VR 622 caters to busy lifestyles while maintaining high culinary standards.

Lastly, the Teka TT 620 is an induction cooktop that embodies modern cooking technology. It heats pots and pans directly, resulting in rapid cooking times and energy efficiency. The TT 620 comes with multiple cooking zones and power levels, enabling precise adjustments for different recipes. Its safety features, such as child lock and automatic shutdown, make it a secure choice for families.

In summary, Teka’s VTN DC, TB 600, TR 620, VR 622, and TT 620 models are designed with modern technologies and user-friendly characteristics, making them excellent choices for any kitchen. Their innovative features ensure a delightful cooking experience while adhering to contemporary efficiency standards.
Top Page Image Contents