Do not use equipment certified for R22 refrigerant only

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

nUse this appliance only for its intended purpose as described in this Owner’s Manual.

nThis air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

nNever unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

nReplace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

nIf the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

nTurn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

nFor your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

nAll air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

nThese R410A air conditioning systems require contractors and technicians to use tools, equipment and safety standards approved for use with this refrigerant.

DO NOT use equipment certified for R22 refrigerant only.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric

shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip

or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

880 specifications

The GE 880 is a significant innovation in the domain of aerospace and defense technology, representing a blend of performance, reliability, and advanced engineering. As part of General Electric's renowned lineup of jet engines, the GE 880 showcases several cutting-edge features and characteristics that elevate its operational efficiency and versatility.

One of the standout features of the GE 880 is its high bypass ratio turbofan design. This configuration allows for a greater volume of air to bypass the engine core, which contributes to improved fuel efficiency while minimizing noise levels. This is particularly advantageous for commercial aviation, where regulatory compliance regarding noise pollution has become increasingly strict. The aerodynamic design also facilitates enhanced thrust-to-weight ratio, providing the engine with the ability to deliver optimal performance across various flight conditions.

The GE 880 is equipped with advanced materials and manufacturing techniques that enhance durability and performance. The use of lightweight composite materials reduces overall weight while maintaining structural integrity, allowing for better fuel economy and operational range. Additionally, the engine incorporates turbine blades made from advanced alloys and coated with thermal barrier coatings, enabling them to withstand extreme temperatures and pressures.

Another key characteristic of the GE 880 is its sophisticated electronic engine control system. This system optimizes engine performance by providing real-time monitoring and adjustments across a range of operational parameters. It assists pilots in achieving optimal efficiency during various phases of flight, from takeoff to cruising and landing. Furthermore, the engine is designed to facilitate easy maintenance, with modular components that simplify repairs and reduce downtime.

In terms of emissions, the GE 880 has been engineered to exceed modern environmental standards. The engine design aims to minimize nitrogen oxide (NOx) emissions and comply with stringent regulations, making it an environmentally friendly option for airlines striving to reduce their carbon footprints.

Overall, the GE 880 stands out in the aerospace sector due to its remarkable combination of efficiency, power, and eco-friendliness. Its advanced technologies, robust design, and commitment to sustainability make it a preferred choice for aircraft manufacturers and operators aiming for reliable performance in an increasingly competitive market. As the aviation industry continues to evolve, the GE 880 is poised to play a crucial role in shaping the future of air travel.