5.FOR MODELS WITH SPRAY IN DECK PLATE (30),
install spray hose (26) and spray head (24) |
|
through deck plate hole. | 24 |
6.TO CONNECT SPRAY HOSE FOR ALL SPRAY MODELS:
Connect spray hose swivel nut (28) to the threaded shank (16). Tighten swivel nut by hand plus 1/4 turn with pliers or channel locks being careful not to twist the spray hose (26). DO NOT OVERTIGHTEN.
Flushing is required. See flushing instructions below.
26
Sink
LINE FLUSHING INSTRUCTIONS
IMPORTANT: Pipe chips, sand, stones and other solids found in new and renovated plumbing can damage the sealing surfaces of the filter cartridge and cause a leak. To avoid damage, DO NOT TURN ON SUPPLY VALVES until instructed below.
Before you insert the filter and filtering appliance:
1. Turn faucet on in the full cold position (handle pointing to the right) and allow cold water to flow for 15 seconds
2.Without turning the faucet off, turn the handle to the full hot position (handle pointing to the left) and allow hot water to flow for 15 seconds.
3.If side spray is installed, without turning the faucet off, turn the handle to the mid/mix position (handle pointing toward you) and turn on the spray for 15 seconds.
4.Shut off faucet.
5.You are now ready to insert the filter and filtering appliance.
7 | HELPLINE: | INS215A |
|
|