MICROTECH™ FILTER INSTALLATION/REPLACEMENT
1. Install a new filter by wetting the outlet ports with water and then inserting into the round filter ports on the faucet head and pushing the filter and head together. Both outlet ports must be 
fully inserted into the filter ports. 2. Install the filter and faucet head
assembly on to the spout by wetting the faucet head
then carefully sliding the free end of the filter into the spout. The head will need to be initially 
turned approximately 1/2 turn counter clockwise from its normal position to slip past the safety catch. Lock the head into place by simultaneously pushing and twisting the head clockwise. When properly installed the head will feel secure, and will be correctly oriented on the spout. 
3. Reset the filter life indicator by pushing the filter 
button 3 times. Wait 10 seconds. You should not be
running water while resetting the filter life indicator 
because the filter button will remain depressed with the 
first push as it switches to filter mode. The filter life indicator 
has been correctly reset if a short series of rapidly flashing green light occurs, indicating that the new filter flushing
period has begun. 4. Flush the filter (see page 3) for 5 minutes before
initial use.
Your new Moen faucet is now ready for normal use.
To replace or install filter -
1. Turn off the faucet. Remove the faucet head by 
twisting it approximately 1/4 turn counter clockwise to 
unlock it. Gently pull the faucet head away from the 
spout and twist it approximately another 1/4 turn to get
the faucet head past the safety catch. The faucet head and depleted filter (if one is installed) can now be pulled completely out of the spout.
2.The filter is held to the faucet head by two outlet
ports, which connect into the head. Remove the old filter by simply pulling it straight off. Discard the old
and install a new MicroTech 400 or 600 filter.
Note: The faucet will function correctly in unfiltered stream mode with or without a filter installed. The faucet will not function
filter mode without a filter. If a filter is not installed and the filter button is depressed, unfiltered water will flow from both the filtered water outlet and the stream outlet aerator, and the filter button will not automatically stay depressed.
Use only Microtech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet system. The Microtech filters are high performance carbon block filters developed specifically for the PureTouch system.
INS215A | HELPLINE: | 8 |
|
|