Samsung SHR-4080P manual Safety Regulations, Before we start

Page 2

SHR-4080P USER’S MANUAL

Safety Regulations

Please be sure to keep the following in mind for the right use of the product to pre-

vent proprietary risk or damage.

Do not use multiple plugs at once.

This may cause abnormal heat generation or fire

Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you.

This may cause fire.

Do not bend the power cord forcibly nor put a heavy material on it.

This may cause fire.

Do not touch the power plug with wet hands.

This may cause electric shock.

Insert the power plug firmly enough not to shake.

This imperfect connection may cause fire.

Keep the product off humidity, dust, or soot.

This may cause fire or electric shock.

Do not put metals(coin, hair pin, metal piece, etc.) or inflammable materials(match, paper, etc.) in the ventilation hole.

This may cause fire.

Keep the surrounding temperature between 0˚C to 40˚C and keep the product off humidity.

This may cause breakdown.

Secure sufficient ventilation.

This may cause abnormal operation due to high temperature.

Keep the product off direct ray of light or heat from the heating device

This may cause fire.

Do not disassemble, repair, or remodel the product.

This may cause fire, electric shock, or injury due to abnormal operation.

Do not pull out the power cord.

This may destroy the power cord, eventually, cause fire or

electric shock.

Plug out in the event of thunder or lightning.

This may cause fire.

Keep your children off the battery after you take it out of the product. They tend to swallow it unconsciously.

If your children swallow it, please see the doctor immediately.

Install the product at a safe place or attach the product to the wall or ceiling with a stand firmly enough not to fall to the ground.

This may injure people.

Before we start

This User’s Manual describes the basic usage of SHR-4080P. This Manual contains all the matters necessary for using SHR-4080P such as brief instruction, part name, function, connecting other equipment, and menu setup of SHR-4080P.

-SEC retains the copyright on this User’s Manual.

-This User’s Manual cannot be copied without SEC’s prior written approval.

-We are not liable for any or all losses to the product incurred by your use of non- standard product or violation of User’s Manual.

-If you want to open the system case to touch the inside, please consult with an expert who works for the shop where you bought the product.

-You may download open source codes from the following website. (See CCTV Part of http://www.samsung.com.)

WARNING

[Battery]

As wrong exchange of the battery in SHR-4080P may cause explosion, you shall use the certified battery for SHR-4080P.

The battery specification is as follows.

-Normal Voltage: 3V

-Normal Capacity: 220mAh

-Continuous Standard Load: 0.2mA

-Operating Temperature: -30 ~ +60˚C

[System Shutdown]

-Power-off without terminating the system in the System Shutdown menu may incur improper motion like data loss and disk failure. Power-off shall be done in the System Shutdown menu.

Code Certification

ii

iii

Image 2
Contents Real Time DVR Safety Regulations Before we startContents Backup Play Backup StartBackup Stop Overview 2Features 1IntroductionName Function Power LED 3Part Names and FunctionsVideo Installation 1Installation Environment Setup 2Checking Product & AccessoryHDD Addition Procedure 3HDD AdditionCable IDE Cable SHR-4080P USER’S Manual SHR-4080P USER’S Manual Connecting with Other Equipment SHR-4080P USER’S Manual Connecting IEEE1394 Device Connecting Network5Connecting Alarm Input/Output Alarm IN5 Alarm IN6 Alarm IN7 Alarm IN8 Alarm Reset6Connecting RS-485 Device Live Definition of Live Screen Icon 2Livescreen Mode1System Motion Definition of Live Screen Mode Selecting Live Screen Mode4Freeze and Zoom 5Event Monitoring 6Spot-out MonitoringChapter Menu Setup 1System Date/Time/Language SetupBefore Use DatePassword Event Log Load Factory DefaultSystem Log External HDD Setup System Information and SetupHDD Setup HDD EraseSystem Shutdown Disk Mode SetupDisk End Mode Disk End BeepCamera Configuration 2CameraScreen Setup PTZ Device3Monitoring Evnet Record Mode 4Record Mode5Event Mode Alarm Motion Detecting Video LossBothContinuous, Event 6Record ScheduleContinuous Recording Holiday7Backup 8NetworkChapter PTZ Camera Control 1PTZ Camera Control Mode PTZ Tele Wide View Preset3PRESET Setup 2Basic Operation of PAN, TILT, & Zoom4Camera Menu Setup For example, Samsung Protocol 5Preset View6Other View Recording 1PANIC Emergency Recording 2REC Normal Recording3Record Schedule 4Event RecordingChapter Search and Play 1Calendar Search Event Search Date/Time Search Go to Last Search Go to First Search6Backup Data Search 7PlayAudio On/Off Play at Faster SpeedViewing Still Screen Backup 1Backup Start 2Backup Stop3Backup Play Chapter Smart Viewer 2Feature 3PC SpecificationRecommendation 4Smart Viewer Installation10-6 Smart Viewer Initial Screen Smart Viewer Program Execution7Monitoring Mode Connection Failure Cases10-12 10-14 10-16 @ Zoom in / OUT @ Sequence # Autopan $ Sort 8Search Mode 10-24 10-26 9SETUP Mode DVR Setup For the detailed items of DVR Setup, refer to , Menu 10-34 Full D1L Video Size does not support 25ips Rate More than one camera shall be selected to apply Alarm Viewer Setup 10-42 Site Setup 10-46 10-48 Version 10-52 Appendix 1Product Specification Specification Remark2HDD Specifications RPMFactory Default Outline Drawing YYYY-MM-DD5SHR-4080P Smart Viewer Play Frame Specification 6TroubleshootingFAQ AB68-00451A
Related manuals
Manual 171 pages 25.03 Kb