SHR-4080P USER’S MANUAL
3Record Schedule
●While “Continuous Recording” or “Both” is selected for Record Schedule in MENU, Timer Recording automatically starts. Otherwise, Timer Recording remains inacti- vated. During Timer Recording, Recording Icon appear on the screen. During recording in HDD, HDD LED in front blinks.
●While Event Recording is selected, recording starts at every event. If it’s the case, recording will be done according to the Event Record setup of the channel in the small [ EVENT Record Mode Setup ] elements among [ EVENT RECORD ] items in MENU.
Note
Even in case of an event, Event Recording will not start unless Event Recording or Both is selected in Record Schedule.
4Event Recording
●Alarm
Sensor State in Event Record Alarm of MENU shall be set to N.O (Normal Open) or N.C (Normal Close)
●Motion Detection
M.D State in Event Record Motion Detection of MENU shall be set to On.
●Video Loss
Video Loss State in Event Record Video Loss of MENU shall be set to On.
●Event Record Mode Setup
When Event occurs, it designates recording type. In particular, depending on PreAlarm Off or PostAlarm Off, PreAlarm or PostAlarm Recording is disabled respectively.