Samsung SHR-4080P manual 7Monitoring Mode, Connection Failure Cases

SHR-4080P USER’S MANUAL

7Monitoring Mode

●DVR(SHR-4080P)/SITE Connection

-Select the name of DVR(SHR-4080P) or site for connection and click the connec- tion button.

Note

You can determine the name, IP, and password of DVR(SHR-4080P) for connection in Setup Mode. Also, setup of a site which permits simultaneous connection to multi- DVRs(SHR-4080P) is available in Setup Mode.

You are allowed for the simultaneous connection with no more than 4 DVR(SHR- 4080P)s as you approaches at the site.

Connection Failure Cases

1. Password Certification Failure

-In case of discord between the Network password set to SHR-4080P and the connection password set to Smart Viewer, a window pops up to induce retry of password input.

2. Admin User Connection Failure

-Where SHR-4080P that you wish to connect to has been already occupied by other user in an Admin. Capacity, you are authorized with access to SHR-4080P concerned in a User capacity.

Note

No more than 3 users, one Admin. authorized user and 2 User authorized users are allowed to access SHR-4080P simultaneously.

Caution

Once occupied by 3 users, SHR-4080P does not permit more connection.

●Monitoring Mode Connection Screen

●Mode Conversion Button

-This button changes Monitoring Mode or Search Mode.

-Mode change is authorized with you only when connected as an Admin. autho- rized user.

10-9 10-10