SHR-4080P USER’S MANUAL
System Information and Setup
●Software Version : Displays the current version. Setup is not available.
●Broadcast Format : Displays the current Format(NTSC/PAL) . Setup is not avail- able.
●Mac Address : 6 Byte hardware address. Setup is not available.
●HDD Erase
This erases the data in ATA / IEEE1394 / SCSI. Click the checkbox of the device that you want to erase and press “OK” You are not allowed to erase the data in Recording or Backup progress.
Note 1
Being a physical hard disk inside the SHR4080 main body connected by an IDE cable, this stores data.
[External HDD]
Being a physical hard disk connected with the port and terminal in the back of the SHR4080 main body, this stores data.
This can be used as Extended HDD or Backup HDD.
-Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal HDD.
-Backup HDD : Backs up the data recorded in the set.
Note 2
[ATA]
Usage : Internal HDD [SCSI]
Usage : External HDD (Extended HDD or Backup HDD)
A physical hard disk connected with the SCSI port in the back of the SHR4080 main body
[IEEE1394]
Usage : External HDD (Extended HDD or Backup HDD)
A physical hard disk connected with the IEEE1394port in the back of the SHR4080 main body
Caution
[HDD Erase]
Data will not be deleted in backup or recording process.
Please be sure to suspend backup or recording before you delete any data.
HDD Setup
●HDD Information
Displays the number, quantity, and status of ATA, IEEE1394, and SCSI. Setup is not available.
Status : Internal HDD, External HDD, Backup HDD
●External HDD Setup
1.Backup/External
You are able to determine the usage of IEEE1394 and SCSI.
Not Defined ➝ When the connected HDD usage is not defined. Expressed in External or Backup.
No Device ➝ When no HDD is connected. You are able to press right TAB after you connect HDD.
External ➝ When the connected HDD is set to External. It may used as a back up HDD if you press the “Enter” key and turn to Backup.
Backup ➝ When the connected HDD is set to Backup. It may used as an External HDD if you press the “Enter” key and turn to External.