SHR-4080P USER’S MANUAL
!PRESET
- If you press the PRESET button, a window for PRESET setup pops up.
●Self Menu Setup of PTZ Camera
1
a
b
a If you click the current PRESET number and name, the camera will move accordingly.
!You may set up the Function Menu in PTZ Camera.
1
2
3
b You can delete the selected or all PRESET setup values.
c
c You can set up a new PRESET number and name.
Note
!The PRESET function is supplied to all camera.
You are allowed to set up no more than 20 PRESET items.
But, the AD Protocol camera supports up to 7 PRESET items.
@AUTOPAN : The camera executes this function, reciprocating between Start and End.
#SCAN : The camera executes this function, circulating the PRESET setup positions.
$PATTERN : The camera executes this function, following user defined route.
Note
The name of @,#, and $ functions varies depending on the camera and some cam- eras does not support any of those functions.
-The Samsung camera supports all the functions and names.
-The Panasonic camera supports all the functions, but with different names.
@ SEQUENCE # AUTOPAN $ SORT
- The PELCO camera supports all the functions, but with different names.
@ FRAME SCAN # AUTO SCAN $ PATTERN
-Other cameras do not support the @AUTOPAN, #SCAN, and $PATTERN functions.
!This is a Menu screen supplied by the camera itself, seen from Viewer.
@ Use the / / / button for the movement between menus.
#This is a button for the role of Enter.
Note
The Camera Menu Setup function is supported by Samsung and Panasonic.
Caution
As far as
The PTZ Camera control related functions are authorized with the user with Admin authority.