SHR-4080P USER’S MANUAL
3Monitoring
●Event Monitoring
You are able to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous.
①Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁3sec/ 5sec/ 10sec/ 20sec/ 30sec : For the period, the screen is seen before the next screen appears.
➂Continuous : The Event Monitoring screen remains alive until you press the front “Alarm” button to cancel the screen manually.
●OSG Display
① Date : The date is displayed on the screen or not depending Date remains On or Off.
➁ Time : The time is displayed on the screen or not depending Time remains On or Off.
➂Title : The title is displayed on the screen or not depending Title remains On or Off.
➃Status : Audio/Ptz is displayed on the screen or not depending Status remains On or Off.
●Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it. Spot Out channel supplies two functions, continuous monitoring of only one channel and Auto Sequence to display all the channels one by one.
① Auto Seq. setup ranges from Ch1 to Ch8.
➁ Set to Auto Seq., Spot Out channels are displayed in turn.
➂ Auto Seq. Duration is as same as determined for Camera Configuration.
●Spot Out Event Monitor
Determines if event monitoring will be executed for Spot Out channels.
① Off : dose not event monitoring in Spot out channel.
➁ 3sec/ 5sec/ 10sec/ 20sec/ 30sec : Duration options on the screen before it
scrolls down.
➂Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm” LED in front manually.
●Monitor Out
You are not allowed to connect VGA MONITOR and Composite MONITOR simul-
taneously. Consequently, the user are obliged to choose either Composite Output or VGA Output.
①Composite : Output comes out of the “Composite Out” port.
➁VGA : Output comes out of the “ VGA Out” port.
Any change from Composite to VGA or vice versa reboots the system automatically.
●PB( Playback ) Channel Position
Designates the position of a channel to be played back in Play Back 9 Split Mode. Right Down : Designates a location on the bottom right corner.
Center : Designates a location in the center.
Caution
[Monitor Out]
Set to Composite Output, VGA does not come out. Set to VGA, Composite Output does not come out.
If you hold on to the MODE button in Live Mode and keep pressing the 0 button for 5 seconds, the status will change from VGA to COMPOSITE or vice versa accompa- nying rebooting.