SHR-4080P USER’S MANUAL
PTZ Device
●ID
PTZ Camera ID from 0 to 255
●Protocol
A protocol supported by PTZ Camera
The following protocols are now being supported.
Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/ Kalatel
●Baudrate
Baudrate supported by PTZ Camera, 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400
●Parity
Defines one among None, Even, and Odd.
●Data
Defines either 7 or 8.
●Stop
Defines either 1 or 2.
●Serial Mode
Defines either Half Duplex or Full Duplex.
Caution
The above items shall be aligned with the PTZ Camera setup condition.
For the details, please refer to User’s Manual of the PTZ Camera manufacturer.
Screen Setup
●This is a window to adjust Brightness/Contrast/Color for the camera image of each channel. Put the cursor on the channel that you want to adjust and set up Brightness/Contrast/Color. Once selected, the channel appear in the PIP area on
the right. Press the | or ❷ key to adjust the value from 0 to 100. |
●If you select CH ✓, all the channel values will become the same as the finally selected channel value.
●“Default” resets the current channel to the basis value of 50.
Note
[Screen Setup Change]
During backup or recording process, the Screen Setup information remains unchanged.
Be sure to stop backup or recording process before you change the information.