Samsung SHR-4080P manual Cable IDE Cable

SHR-4080P USER’S MANUAL

4.Pull BRACKET-HDD to the product center to detach the fixed part at the bottom to detach BRACKET-HDD from the product.

5.Tighten 4 SCREW-SPECIALs(BWH,6-32UNC,L10.5), supplied as an accessory to fix HDD to BRACKET-HDD. (Screw tighten force shall be strong enough to resist vibration.)

6.Restore HDD installed BRACKET-HDD.

(Assembly shall be done in the reverse procedure of disassembly as follows. Align the 5 fix- ing points at the bottom with the BRACKET-HDD fixing holes respectively and push BRACK- ET-HDD out of the product to align the screw fixing holes. Then, tighten the screws firmly.)

7.Check if BRACKET-HDD has been fixed to the product and connect both the power supply cable and the signal transmission cable (IDE CABLE) to the HDD.

Signal Transmission	Power	Supply Cable
Cable (IDE Cable)

2-5 2-6