Installation
CAUTION
•Make sure that the connection parts are not exposed to outside.
•Be sure to use insulation tape and a contraction tube made of approved reinforced insulating materials that have the same level of withstand voltage with the power cable. (Comply with the local regulations on extensions.)
WARNING
•In case of extending the electric wire, please DO NOT use a
pressing socket.
a fire.
Step 2.5 Installing and connecting the drain hose
1Install the drain hose.
Drain hose | Assembly pipe | Connection hose |
Wall |
|
|
Indoor unit |
|
|
Drain hose |
| Water |
|
| |
Slant downwards | Slant upwards | Dipped in water |
| 5 cm |
|
| less | Ditch |
|
| |
Bent | Too small | Too small |
| clearance | clearance |
2Pour water into the drain pan. Check whether the hose is well drained.
12English
CAUTION
•Make sure that the indoor unit is in upright position when you pour water to check for leakage. Make sure that the water does not overflow onto the electrical part.
•If the diameter of the connection hose is smaller than the product's drain hose, water leakage may occur.
•Inadequate installation may cause water leakage.
•If the drain hose is routed inside the room, insulate the hose so that dripping condensation does not damage the furniture or floors.
•Do not box in or cover the drain hose connection. Drain hose connection must be easily accessible and serviceable.
Step 2.6 Optional: Extending the drain hose
Drain hose (A) Extension drain hose (B)
(A)(B)
Drain hose | Extension drain hose |
20 mm or more Foam insulation
Vinyl tape