Samsung AR09MSPXASINEU, AR12MSPXASINEU, AR12MSPXBWKXEU, AR09MSPXBWKXEU, AR12MSPXBWKNEU manual ①+②, c

Page 20

Refrigerant type

GWP value

R-410A

2088

GWP=Global Warming Potential

Calculating tCO2e : kg x GWP / 1000

Indoor unit

Outdoor unit

Unit

Kg

tCO2e

, a

, b

①+②, c

NOTE

aFactory refrigerant charge of the product: see unit name plate

bAdditional refrigerant amount charged in the field (Refer to the above information for the quantity of refrigerant replenishment.)

C Total refrigerant charge

d Refrigerant cylinder and manifold for charging

CAUTION

The filled-out label must be adhered in the proximity of the product charging port (e.g. onto the inside of the stop valve cover).

Installation

20English

Image 20
Contents Air conditioner Contents Safety Information on Installation General informationInstall the unit in a place where water can drain smoothly Fires, explosions or injuriesChoosing the installation location PreparationMinimum clearances for the outdoor unit CasesUnit mm AccessoriesAccessories in the indoor unit package Accessories in the outdoor unit package Tools General toolsTools for test operation Thermometer Resistance meter Electroscope EnglishDrilling a hole through the wall Taping the pipes, cables, and drain hoseIndoor Unit Installation Installation plateDisassembling the cover panel Remove the cap screws, then the screwsConnecting the Power and communication cables assembly cable Optional Extending the power cable Compression dimension should beInstalling and connecting the drain hose Install the drain hoseOptional Extending the drain hose FireOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe Pass the pipe through the hole in the wallWhen fixing the indoor unit on a window frame 10 Fixing the installation plateWhen fixing the indoor unit on a wall 11 Fixing the indoor unit to the installation plate When fixing the indoor unit on a gypsum boardFix the installation plate without inclining to one side 12 Assembling the cover panel Outdoor Unit Installation Fixing the outdoor unit in place Refrigerant pipes That the fan can operate correctlyCooling capacity and malfunction. Use a vacuum pump Leave the system in the standby modeEvacuating the air Adding refrigerant Siphon①+②, c Installation Inspection Running the Smart Install modeError between Power cable or communicationMotor Connector Remove foreign substance. Check Blocking error OpenCheck the following Strength of the installation site Performing final check and trial operationPumping down for removing the product Let the compressor run for more than 5 minutesAssemble the Case Sub PCB to the indoor unit Sub PCB installationoptionalAttach the Sub PCB to the Case Sub PCB DB68-06732A-03
Related manuals
Manual 2 pages 25.92 Kb Manual 39 pages 32.94 Kb Manual 25 pages 2.73 Kb Manual 36 pages 15.94 Kb Manual 36 pages 60.74 Kb Manual 36 pages 44.82 Kb Manual 36 pages 4.31 Kb Manual 25 pages 23.47 Kb Manual 36 pages 14.89 Kb Manual 36 pages 10.71 Kb Manual 25 pages 19.68 Kb Manual 25 pages 63.09 Kb