Troubleshooting

Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.

PROBLEM	SOLUTION

The air conditioner does	• Check power status and then operate the air conditioner again.
not work at all.	• Plug in or switch on the circuit breaker and then operate the air conditioner again.
	• Check if you have set the Off Timer. Operate the air conditioner again by pressing the
		Power button.

The temperature	• Check if you have selected Dry/Fan/Turbo/d'light Cool mode. In these modes, desired
adjustment is not working.		temperature is set to auto and you cannot adjust the temperature.

Cool/Warm air does	• Check if the set temperature is higher(during Cool mode)/lower(during Heat mode) than
not come out of the air		the current temperature. Press the Temp hr. + or – button on the remote controller to
conditioner.		change the set temperature.
	• Check if the Full HD filter is blocked by dirt. If there is a lot of dust on the Full HD filter,
		cooling(heating) performance may decrease. Clean them frequently.
	• Check if the outdoor unit is covered or installed near the obstacle. Take the cover off and
		take the obstacle away.
	• If you want to operate the air conditioner in the sunlight, cover the outdoor unit using
		curtains or etc.
	• Check if the air conditioner is operating in De-ice mode.
		When the ice formed in winter or the outdoor temperature is too low, the air conditioner
		operates in De-ice mode automatically. In De-ice mode, indoor fan stops and cool air does
		not come out.
	• If the doors or windows are open, it may cause bad cooling (heating) performance.
		Close the doors and windows.
	• Check if the air conditioner has just been turned on after stopping cooling or heating
		operation. In this case, just a fan will run to protect the outdoor unit compressor.
	• Check if the pipe length is too long. When the pipe length exceeds maximum allowable
		pipe length, cooling (heating) performance may decrease.

Air flow adjustment is not	•	Check if you have selected	mode. In these modes, and you cannot adjust the
working.		air flow direction.
		(If the good’sleep mode is operating in Heat mode, you can adjust the air flow direction)

Fan speed adjustment is	•	Check if you have selected Auto/Dry/Turbo/		/d'light Cool mode. In these
not working.		mode, fan speed is set to Auto and you cannot adjust the fan speed.

Remote controller is not	• Check if your batteries are depleted.
working.	• Make sure nothing is blocking your remote controller sensor.

•Check that there are strong lighting apparatus near the air conditioner. Strong light which comes from fluorescent bulbs or neon signs may interrupt the electric waves.

Timer function does not	• Check if you press the Set/Cancel button on the remote controller after you have set the
set.	time.

The indicator is blinking	• Press the Power	button or disconnect the power plug/switch off the auxiliary power


continuously.	switch.
	If the indicator is still blinking, contact the service center.

Odors permeate in the	• Check if the appliance is running in a smoky area. Ventilate the room or operate the air
room during operation.	conditioner in Fan mode for 1~2 hours. (We do not use smelly components in the air
	conditioner.)
	• Clean the Full HD filter if they are dirty. Replace the Deodorizing filter if it is dirty.

AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 22

2011-3-19 15:45:15

AQV18KBAN, AQV09YWAN, AQV09KBAN, AQV18YWAX, AQV09KBAX specifications

Samsung has long been a major player in the electronics market, and its air conditioning units are no exception. Models like AQV12KBAX, AQV12YWAN, AQV18YWAN, AQV09YWAX, and AQV12YWAX showcase the company’s commitment to innovation and user comfort, providing advanced features and superior performance.

The AQV12KBAX is known for its efficient cooling capabilities, leveraging the inverter technology which adjusts the compressor speed based on room temperature, thereby reducing energy consumption and maintaining a consistent temperature. This model also features a quiet operation mode, ensuring that it does not disturb your peace while providing optimal cooling.

Moving to the AQV12YWAN and AQV18YWAN, these models incorporate Samsung’s WindFree cooling technology. This unique feature allows the air conditioner to distribute cool air without the discomfort of direct cold drafts, resulting in a more comfortable indoor environment. The energy-efficient design means that these units can cool larger spaces while utilizing less power, making them an excellent choice for households looking to reduce their energy bills without sacrificing comfort.

The AQV09YWAX and AQV12YWAX models are especially noteworthy for their smart features. They can be integrated with smart home systems, allowing users to control their air conditioning units remotely via smartphone applications. This not only provides convenience but also enables users to monitor energy consumption in real-time, optimizing usage based on their schedules.

All these models are equipped with advanced air purification technology, ensuring that the air circulated is not only cool but also clean. This feature is particularly valuable for those with allergies or respiratory issues, as it helps to filter out dust, pollen, and other airborne pollutants.

In terms of design, Samsung’s air conditioning units are sleek and modern, making them a stylish addition to any room. With their compact size and elegant aesthetics, they blend seamlessly into any interior while providing powerful performance.

In conclusion, Samsung's AQV12KBAX, AQV12YWAN, AQV18YWAN, AQV09YWAX, and AQV12YWAX air conditioning models represent the pinnacle of modern HVAC technology. Their combination of energy efficiency, user-friendly features, and advanced cooling capabilities make them an excellent choice for those seeking reliable climate control solutions. Whether for a small room or a larger living area, Samsung’s air conditioning units deliver comfort, cleanliness, and convenience.