installation and external connection
Input Connection
Door Open |
|
Sensor | PUSH |
| Exit Button |
Door Open |
|
Sensor | PUSH |
| Exit Button |
GND
Input #7
GND
Input #6
GND
Input #5
GND
Input #4
GND
Input #3
GND
Input #2
GND
Input #1
- Exit Button Connection (Input #1, Input #3)
1.Connect one line of the Exit button to an input port (Door 1: Input #1, Door 2: Input #3) of the Exit button.
2.Connect the other line of the Exit button to GND
- Door Sensor Connection (Input #2, Input #4)
1.Connect one line (COM) of the door open/close sensor to the input port (Door 1: Input #2, Door 2: Input #4) of the door sensor.
2.Connect the other line (NC) of the door sensor to GND
| Door Number | Exit Button | Door Open Sensor | Note | |
Two Door Control | 1 | Input #1 | Input #2 |
| |
2 | Input #3 | Input #4 |
| ||
|
| ||||
| 1 | Input #1 | Input #2 |
| |
Three Door Control | 2 | Input #8 | Input #9 | I/O Board | |
| 3 | Input #10 | Input #11 | I/O Board | |
| 1 | Input #1 | Input #2 |
| |
Four Door Control | 2 | Input #3 | Input #4 |
| |
3 | Input #8 | Input #9 | I/O Board | ||
| |||||
| 4 | Input #10 | Input #11 | I/O Board |
16_ installation and external connection