Samsung SSA-P400/EXP, SSA-P400T/EXP manual Product speciﬁcations, Product Specifications

Page 26

product speciﬁcations

PRODUCT SPECIFICATIONS

	Item	SSA-P400	SSA-P400T	SSA-P401	SSA-P401T

	Users	1,000 ~ 20,000 / 30,000 / 40,000 / 50,000 Users (Default :20,000)

	Event Buffer	20,000 ~ 29,500 / 3,000 / 8,000 / 14,000 (Default : 29,500)

	Power / Current	DC 12V, MAX.	DC 12V,	DC 12V, MAX.	DC 12V,
	Power / Current	380mA	MAX.430mA	380mA	MAX.430mA
		380mA	MAX.430mA	380mA	MAX.430mA

	Reader Port	4ea: 26bit Wiegand, 4 / 8bit Burst for PIN		4ea: 34bit Wiegand, 4 / 8bit Burst for PIN

	Door Open Time	00~99 Sec. (Default 3Sec.)

	Communication	RS-232 / RS-422 /	RS-232 / RS-422 /	RS-232 / RS-422 /	RS-232 / RS-422 /
	Communication	RS-485	RS-485, TCP/IP	RS-485	RS-485, TCP/IP
		RS-485	RS-485, TCP/IP	RS-485	RS-485, TCP/IP

	Baud Rate(bps)	9,600bps

	Input Port	15ea

	Output Port	12ea : 2 FORM-C Relay Output (COM, NO, NC) / DC12V~18V, Rating Max.2A

		3ea: TTL Output / DC5V, Rating Max.20mA
		3ea: TTL Output / DC5V, Rating Max.20mA

	LED Indicator	38ea : 21 LED Indicators (Red, Green and Yellow)
	LED Indicator	17 LED Indicators (Red, Yellow)
		17 LED Indicators (Red, Yellow)

	Beeper	Piezo Buzzer

	Operating Temperature	0°C to +50°C

	Operating Humidity	10% to 90% relative humidity non-condensing

	Color / Material	Black/ PCB

	Dimension	145 x 185 x 18
	(W x H x D(mm))	145 x 185 x 18
	(W x H x D(mm))

	Weight	340g	350g	340g	350g

26_ product speciﬁcations

Image 26

Contents Access Control Panel Please visit our websiteSafety information Safety informationImportant Safety Instructions Contents Features Product introductionSettings Input Port Format SetupDoor Open Alarm and Forced Door Open Alarm Holiday SetupCD Manual WHAT’S IncludedMain Unit Switch System after the initialization Output Relay #1 ~ Board ID SetupSwitch Address Setup 5V for any output occurrence SwitchSignal occurs IndicatoradditionallyInput LED Indicator Buzzer control settingsConnector used to connect to the main board BoardInput port #10 Input port #8Input port #9 Input port #11Cable Selection Host P.CBypass Diode Connection Connecting the Termination Resistor and DiodeTermination Resistor Termination Resistor in RS-485 CommunicationInstallation and external connection EARTH-GROUNDING the Communication CablesReader Connection POWER, READER, and I/O ConnectionPower Connection Input Connection Exit Button Connection Input #1, Input #3Output Connection DC +12V GNDHost PC Communication Line ConnectionRS-232 Communication Port Connection Check the location of the communication portTX+ RS-422 Communication Port Connection StandaloneHost RX+RS-422 Communication Port Connection Multiple Units TX+ RX+TCP/IP Communication Conﬁguration TCP/IP Communication Port ConnectionHUB TCP / IP TCP/IP ConnectionInitialization Initializing the system using the Initialize switchSwitches simultaneously System InitializationBoard ID Setting You can specify between 0 and 255 for the board IDProblem Action TroubleshootingTroubleshooting No communication is available ProblemWhen the system is in sync with Product Specifications Product speciﬁcationsCorrect disposal of batteries in this product

Related manuals

Manual 80 pages 17.65 Kb