Samsung SCC-C7478P manual Function Setup, Parking Action Setup, Alarm Input Setup

How to use OSD Menu

❖Parking Action Setup

FUNCTION SETUP

PARKING ACTION SETUP		FUNCTION SETUP
PARK ENABLE	OFF	<PRESET SETUP>
WATT TIME	00:10:00
		<AUTO PAN SETUP>
PARK ACTION	HOME
		<PATTERN SETUP>

<SCAN SETUP> <SCHEDULE SETUP>

BACK

EXIT

If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned “Wait Time”.

•	Park Enable	[ON/OFF]
•	Wait Time	[5 sec ~ 4 hour]

The time is displayed with “hh:mm:ss” format and you can change this by 1 sec unit.

•Park Action

[HOME/PRESET/PATTERN/AUTOPAN/SCAN]

Ex) If HOME is selected for Park Action, camera will move to home position when there is no PTZ command during assigned “Wait Time.”

❖Alarm Input Setup

ALARM INPUT SETUP

ALARM1 N.0	PRESET1
ALARM2 N.0	NOT USED
ALARM3 N.0	NOT USED
ALARM4 N.0	NOT USED
ALARM5 N.0	PRESET1
ALARM6 N.0	NOT USED
ALARM7 N.0	NOT USED
ALARM8 N.0	NOT USED

BACK

EXIT

Match the Alarm sensor input to one of Preset positions. If an external sensor is activated, camera will move to corresponding preset position when this item is predefi ned.

•Alarm Type

[Normal OPEN(N.O) / Normal CLOSE(N.C)] Sets sensor input type.

•Alarm Action

[NOT USED/HOME/PRESET 1~128/APAN 1~8, PATTERN1~4, SCAN 1~4]

For each Alarm input, you can assign counteraction functions (Preset, Auto Pan, Pattern, Scan).

BACK

EXIT

Confi gure 5 Special Functions with this menu

•Preset Setup

127 Presets from the number 1 to 128 can be assigned excluding preset 95 reserved for Menu.

•Auto Pan Setup

Up to 8 Auto Pans are available, which makes camera to move slowly between two preset points.

•Pattern Setup

Up to 4 patterns can be stored in the dome.

In this function, path data created by manual move of Joystick are recorded and you can playback the identical path automatically whenever required.

•Scan Setup

Up to 8 Scans can be defi ned.

In a Scan, max 20 entities are assigned from any combinations of Preset/Auto Pan/Pattern. If you run a Scan, camera will execute each entry sequentially.

•Schedule Setup

7 rules of Schedule can be assigned by day and time. Appropriate actions (such as Home, Preset, Auto Pan, Pattern and Scan) can be defi ned for each rule. Also, it is possible to use Weekday and Weekend in a rule to make it simple.

ENG

English – 21