initial cleaning
Before the oven is used for the first time, initial cleaning of the oven is required to remove the new oven smell.
1.Remove all accessories from the oven.
2.Run oven with convection 200 °C or conventional 200 °C for an hour. This procedure will burn any remaining production substances in the oven.
3. Switch off the oven by turnning mode selector to “off” after an hour.
For the first time use of the accessories, clean the accessories thoroughly with warm water, detergent and soft clean cloth.
using the oven
Your new oven has below basic steps for cooking.
Mode selector |
| Cavity selector |
| Temperature | Multi function |
|
| ||||
STEP 1 |
| STEP 2 |
| STEP 3 | selector |
|
|
| |||
SELECT THE |
| SET COOKING |
| SET |
|
CAVITY FIRST |
| FUNCTION |
| TEMPERATURE |
|
USE OF CAVITY
Twin mode
The twin mode allows you to cook two meals at different functions and different temperature settings. Divider is required to use this mode.
Lower mode The lower cavity is used for cooking. Divider is required to use this mode.
Upper mode
The uppper cavity is used for cooking. Divider is required to use this mode.
Single Mode
The total cavity is used for cooking. Remove the divider.
| In single mode, the oven operates like a traditional oven. | |
SINGLE MODE | Use this mode for large amounts of food or if you need special | |
accessories such as the spit. | ||
| ||
| Remove divider from the oven to use this mode. | |
| Only upper cavity or lower cavity used for cooking. | |
UPPER MODE | These modes save time for | |
| smaller amount of food. Insert divider into shelf level 3 to use this mode. |
When you choose to cook in half cavity mode (upper or lower
LOWER MODEmode), the door glass of unused cavity might show signs of condensation.
| In twin mode, the upper cavity and lower cavity operate with | |
TWIN MODE | different functions and temperature for each other. The cook timer | |
and end timer settings are also available for each. Insert divider into | ||
| ||
| shelf level 3 to use this mode. | |
14_initial cleaning |
|
16/02/2013 11:08:40