Samsung AR24HPFNBGM/MG Mode, When the air conditioner is on and in cool/heat mode, English-19

Page 19

mode

For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up from mode.

When the air conditioner is on and in cool/heat mode

1. Press the	button on the remote controller.
	indicator appears and Off timer indicator starts blinking on the remote

good’	controller display.
good’
sleep

2. Press the Time Up or Time Down button to set the time.

 You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from 3 hours ~ 12 hours.

Operating hour can be set from minimum 30 minutes to maximum 12 hours.

 Default operation hour is set to 8 hours.

3. Press the Set button to active it on.

 Off timer indicator stops blinking and reserved time will be displayed for 3 seconds. Then the air conditioner operates in good’sleep mode.

 If you don’t press Set button within 10 seconds after pressing the or Time Up or Time Down button, the air conditioner will return to previous status. Check Off timer indicator on the remote controller display and indicator on the indoor unit.

Cancel Press the Cancel button.

You can set the desired temperature by 1 ˚C in the range of 16 ˚C~30 ˚C.

Fan speed will be adjusted automatically according to the mode.

However, If you selectmode while heating operation is on, you can adjust fan speed.

When the mode is on.

In Cool mode: Air flow direction will be adjusted automatically.

In Heat mode: Adjusting air flow direction is available.

c f03undAdvance n iot

Temperature and fan speed changes inmode

•Fall asleep: Eases you into sleep by dropping the temperature.

•Sound sleep: Relaxes your body and raises your temperature slightly.

•Wake up frommode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.

• Set Off timer in	mode over 5 hours. You fell disturbed sleep if the	is set too short or long
because the default is set to 8-hour-operation.

•If themode is set less than 4 hours, the operation will stop at the same time.

If themode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.

•Recommended set temperature is between 25 ˚C~27 ˚C for cooling and 21 ˚C~23 ˚C for heating.

English-19

MG_GOOD_A3050_IB&IM_EN_DB68-04069A-00.indd 19

11/09/2013 21:10:42

Image 19

Contents Air Conditioner Features of your new air conditioner Contents English-4 Safety precautions01epaPr n atio English-5English-6 For UsingEnglish-7 English-8 Do not place objects or devices under the indoor unitEnglish-9 For CleaningOperation ranges Checking before useEnglish-10 English-11 Technical SpecificationsT05s In llan atio English-12 Checking the name of the partsMain parts DisplayRemote controller buttons Checking the remote controllerEnglish-13 Inserting the batteries Remote controller displayBattery changing time Storing the remote controllerBasic function Press the button to set the desired fan speed Press the button to adjust the temperatureEnglish-16 English-17 Adjusting the air flow directionVertical air flow Horizontal air flowUsing the Comfort function Using the Fast functionEnglish-18 Mode When the air conditioner is on and in cool/heat modeEnglish-19 Press the On Timer/Off Timer button Setting the On/Off timerEnglish-20 If the air conditioner is on If the air conditioner is off From the moment you have set the timerTurn off automatically When the air conditioner is turned on Using the Auto Clean functionEnglish-22 Sre04 Oth Cleaning the air conditionerCleaning the outdoor unit heat exchanger English-23Remove the air filter from the main body Cleaning the air filterRemoving the Air filter English-24English-25 Reassembling the Air filterTop of the Air filter into the main body.. ➀ English-26 Maintaining the air conditionerAir conditioner TroubleshootingEnglish-27 Heard when refrigerant flow movement changes. It is normal Button or disconnect the power plug/switchCheck the Drains have been cleared Regular Maintenance Error is indicatedEnglish-29 General informationIndoor unit Choosing the installation locationInstalling the unit Power supply line, fuse or circuit breakerOutdoor Unit Where sulfide gas existsEnglish-31  Figure Description When installing more than 1 outdoor unitWhen the air outlet is towards the wall English-32Llan AccessoriesAccessories in the indoor unit case English-33Tools for test operations Accessories in the outdoor unit caseOptional accessories Tools required for installation General ToolsAssembling the hanger screw Fixing the installation plateEnglish-35 English-36 This QR code for detail video of indoor unit installationRemoving the screws Removing the Cover panel Before mounting the indoor unitEnglish-37 Assembling the Cover panel After mounting the indoor unitEnglish-38 Connecting the assembly cableCable specification Connecting the cableEach wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryEnglish-39 Torque English-40Smooth the cut edges Cut off the remaining foam insulationUnscrew the caps at the end of each pipe Evacuating the indoor unitCutting or extending the pipe English-41Put a flare nut slightly into the pipe and modify the flare English-42Depth a English-43 Drain hose installationDownwards as seen in the picture Change the direction only when it is necessaryEnglish-44 ShieldDrain hole Drain plug Evacuating the connected pipesEnglish-45 Connect a drain hose to the drain plugIf you use a pipe longer than 5 m Adding RefrigerantEnglish-46 Outer TorqueEnglish-47 Performing the gas leak tests12HC 507 12HP 543 18HC 602 Outdoor unit installed on the wall by rackFixing the outdoor unit in place English-48English-49 Smart Install modeOff Blinking English-50English-51 Final check and trial operationAfter tube contraction work is completed, wrap it with How to connect your extended power cablesEnglish-52 Apply heat to the contraction tube to contract itMGGOODA3050IB&IMENDB68-04069A-00.indd 11/09/2013 0211 Questions or COMMENTS?