Samsung AR18HCFNBGMNMG, AR18HCFNBWK/MG, AR12HCFNBWKNMD manual Removing the screws, English-36

Disassembling/Assembling the Cover panel for indoor unit installation

Please scan

this QR code for detail video of indoor unit installation..

In order to install the indoor unit, you must disassemble the cover panel first.. Please proceed following instructions to disassemble and assemble the cover panel.. Hooks (on the cover panel) may get damaged if you apply excessive force as you disassemble and assemble the cover panel.. Please follow the following instructions..

Removing the screws

Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened with screws.. Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel..

Cap Screw

<Remove the Cap screw>

Cover Panel

<Unfasten the screw>

Removing the Cover panel (Before mounting the indoor unit)

Cover panel is fixed to a main body of the product with hooks on two sides and central part as shown in the illustration.. Release the hooks on the sides first, and then release the hooks on the central part..

Check the location of the hooks before removing the cover panel..

ffLocation of the hooks on the central part

Side part

Central part

Number and location of the hooks

Hook

 For specific Hook location and quantity, please refer to cover panel with indicating arrows based on physical goods..

English-36

MG_GOOD_A3050_IB&IM_EN_DB68-04069A-00.indd 36

11/09/2013 21:11:10