Samsung WF338AAB/XAA manual When it finishes washing, End

troubleshooting

Jammed Key.	Call for service
Motor speed sensor problem.	Restart the cycle.
	If the code reappears, call for service.
Temperature sensor problem.	Restart the cycle.
	If the code reappears, call for service.
High current detected.	Restart the cycle.
	If the code reappears, call for service.
High/Low voltage detected.	Restart the cycle.
	If the code reappears, call for service.
Too many suds are detected	To prevent it, cut down on detergents.
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
SUdS codes will blink in turn.

For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)

24_ Troubleshooting

WF338AA-02562A-06_EN.indd 24

2009-12-22 ¿ÀÀü 11:07:55