Detergent Guidelines
Auto Dispense
The washing machine provides a
CAUTION
•Use only a liquid detergent and fabric softener with the Auto Dispense unit.
•Make sure the Auto Dispense unit is inserted completely. The washing machine will not start operating until the Auto Dispense unit is inserted properly.
•When applying a different detergent, make sure to clean the detergent compartment first.
•Do not mix detergent with fabric softener in either compartment.
•To prevent detergent from hardening, do not open the cap once the detergent has been applied to the compartment.
•Do not use any bleach that may cause corrosion and/or generate gas.
•Do not turn the Auto Dispense unit upside down. The content may spill out of the vents.
•Do not press the outlet at the bottom of the Auto Dispense unit while moving the unit. The content may leak.
•Use caution when inputting detergent or fabric softener in the unit. The content may spill around.
•Make sure to remove the Auto Dispense unit before applying detergents.
•When removing the Auto Dispense unit to check the remaining amount of detergent upon or before an error message, the unit may have some small amount of detergent remaining or leaking from the bottom of the unit.
•Fully insert the Auto Dispense unit. Incomplete insertion may cause the unit to fail in dispensing.
• By default, Auto Dispense turns off in the Delicates, Wool, Baby Care, or Outdoor Care courses.
To enable Auto Dispense in these courses, tap Settings or the Quick Panel Bar > Auto Dispense, and change the settings as necessary.