Samsung SSA-S2000/EXP manual Time setup, To Specify the Output Time if the Card is Authenticated

I/O time setup

❖Output Port Setting Table

You must specify the port settings using whatever combination of the followings if you want the device to operate in Secure mode or normal + Secure mode.

Port	Setting Value	Example
Operation mode setting value		EX 1)
		If only the door relay operates in normal and
Operate only in Secure mode	00	Secure modes
		Normal and Secure modes: 50
Operate in normal mode and Secure mode	50
		Door Relay: +01
Operation port setting value		Output Port Setting Value: 51
Operate the door relay only	01	EX 2)
Operate the alarm relay only	02	If the alarm relay and the TTL output operate in
		Secure mode
Operate the TTL output only	04
		Secure Mode: 00
		Alarm Relay, TTL: +06
Operate the door relay and TTL output	05
		Output Port Setting Value: 06
Operate the alarm relay and TTL output	06

TO SPECIFY THE OUTPUT TIME IF THE CARD IS AUTHENTICATED

I/O TIME SETUP

You can specify the output time if the card ID is authenticated.

When the card ID is authenticated, the door relay and the TTL output operate for a set time.

1.Present the Master Card to the device.

2. Press Button 2 and Button 1 in sequence and press ENT .

3.Enter the two-digit door open time and press ENT .

4.Specify the two-digit TTL output time and press ENT .

•For instance, if you set the door open time to “03” and TTL to “00”, the door relay operates for 3 seconds for an authenticated card ID.

•By default, the door relay operates for “03” seconds while the TTL output works for “00” second in normal and Secure modes.

•You can specify from 10 to 99.

X Y Z

\ ]

`

lzj W lu{

iŒ““

zzhTzYWWW

X Y Z

[\ ] ^ _ `

lzj W lu{

iŒ““

zzhTzYWWW

English _ 29