Samsung SSA-S2000/EXP manual Wiegand Output Setup, Initialization, Brown line with white stripes

initialization

WIEGAND OUTPUT SETUP

You can transfer data of the card read by SSA-S2000 in the 26-bit Wiegand output format. Enabling this function will disable the TTL output and the chime bell sound.

1.To enable the 26-bit Wiegand output, you must manipulate the switch panel (SW1 and SW2) on the rear of the product.

2.See the table below to make adjustment as needed.

❖Output Format

SW1 #1

SW1 #2

SW2 #1

SW2 #2

Orange line with white stripes

Brown line with white stripes

ON

OFF

ON

OFF

TTL Output

Chime Bell Output

OFF

ON

OFF

ON

Wiegand Data0

Wiegand Data1

J In the 26-bit Wiegand output mode, you can not initialize the product by short-circuiting cables.

INITIALIZATION

If you have the Master Card registered, you can use it to initialize the device.

1.Present the Master Card to the device.

2. Press the 9 button twice and press ENT .

3.The system will restore the factory default settings with all LED indicators blinking.

M Initializing the system will lose all data.

 If the product works abnormally, use initialization to restore the default settings.

X Y Z

\ ]

`

lzj W lu{

iŒ““

zzhTzYWWW

X Y Z

[\ ] ^ _ `

W lu{

zzhTzYWWW

16_ initialization