Samsung SSA-S3010/EXP manual Registering the ID, To register the ID card

Page 35

REGISTERING THE ID

To register the ID card

1.Press the F7 SETUP MENU button.

2.	Use the buttons	4	and 6 to move to the REGISTRATION item and
	press ENT .
3.	Press the button	1	to select CARD.

•For card registration, select the card to register the ID.

For PIN registration, select PIN and use the keypad to register the ID.

4.Put the card onto the main unit to display the card ID on the screen.

5.Set each of PW/TA/TB/C/RD/MA/MB/LV/FP.

•For more information about each item, refer to “ID Registration Items” below.

•Set FP to 0.

6.ID registration is completed.

1. REGISTRATION

1.REGISTRATION 1:CARD 2:PIN

1.REGISTRATION SCANNING…

1.REGISTRATION ID:1230001

PW_ TA TB C RD MA MB LV FP

USER MANAGEMENT

ID REGISTERED!

❖ID Registration Item (PW /TA/TB/C/RD/MA/MB/LV/FP)

Item		Description
PW	4-digit password used in ID+PW

TA	Time schedule code for READER#1 (Internal reader)

TB	Time schedule code for READER#2 (external reader)

	Permission code for the user ID

	NO	Description
	0	Normal card
C	1	2-person authentication (administrator)
	2	2-person authentication (visitor)

	3	Set ARM/DISARM

	4	Missing card

Reader assignment to the card user

	NO	Description
0		READER#1, READER#2 assigned
RD
RD		READER#1 assigned
	1	READER#1 assigned
	2	READER#2 assigned
	3	READER#1, READER#2 assigned

READER#1 operation mode for the registered user

NODescription

0System Operation Mode

MA	1	ID mode
	1	ID mode
	2	ID+F/P(P/W)

	3	ID+F/P+P/W

Item		Description
	READER#2 operation mode for the registered user

	NO	Description
MB	0	System Operation Mode
	1	ID mode
	2	ID+P/W


	Output operation level for the registered user

	NO	Description

0Output Level 1 on access authentication

	LV		1	Output Level 1 on access authentication
		2		Output Level 2 on access authentication

		3		Output Level 3 on access authentication

		4		Output Level 4 on access authentication

		Use/disuse of ﬁngerprint

	FP		NO	Description
	FP	0		Fingerprint not used.
		0		Fingerprint not used.

		1		Fingerprint used.

English _ 35

Image 35

Contents Please visit our website Standalone Biometric Access ControllerSafety information Safety informationThis device may not cause harmful interference, Important Safety InstructionsSafety Information Contents Contents Input Type Setup Event Memory SetupWiegand Output Setup Voice Volume SetupProduct introduction FeaturesDuress Alarm External I/O PinsForced Door Open Alarm Door Open Timeout AlarmQuick Guide CD Manual WHAT’S IncludedLCD AT a GlanceFront Panel LED Communication status indicatorPin Connector Preliminary connector for extension Rear PanelCable Color Scheme PIN ConnectorPins Signal Cable Color Cable Selection TCP/IP RJ45 ConnectorFollow the instructions below to install the wall mount Installing the Wall MountBypass Diode Connection Connecting the Termination Resistor and DiodeEARTH-GROUNDING the Communication Cables Input Connection ConnectionOutput Connection External Reader Connection External Reader ConnectionRS-232 Communication Port Connection Communication Line ConnectionPlease follow the steps below RS-485 Communication Port Connection StandaloneRS-485 Communication Port Connection Multiple Units Max mConnect all RS-485 ports of the product in parallel TCP/IP Communication Port ConnectionInitializing the System Initializing the system using the Initialize switchSystem Initialization in Master Mode InitializationTo register a master card To Access the Master ModeRegistering a Master ID Lift PUT Your Finger To register a master card along with your ﬁngerprintTo register a master card PIN 00/00Not USE Name DisplayTo register a master card PIN along with your ﬁngerprint Language Setup User Count SetupComm Addr SET DATE/TIME SetupCommunication Address Setup SET DATE/TIMEBaud Rate Baud Rate SetupFactory Defaults Default SETREADER#1 Mode ID only JID+F/PP/W Reader mode setupReader #1 Mode Reader #2 ModeReader #2 KEY Input € USE If set, you can get access using the keypad inputRD#1 KEY Input not USE Reader Mode Setup Reader #1 KEY InputDual F/P Mode Jnot USE Dual F/P Mode USE Dual Fingerprint ModeIdentification Jnot USE Adaptive ModeIdentification Mode Adaptive Mode not USE Jnot USE Adaptive Mode USE Mode SetupTo register ID along with ﬁngerprint Registering ID in Quick ModeUser management To register IDPW TA TB C RD MA MB LV FP User Management ID Registered Registering the IDTo register the ID card SSA-S30x1 Numeric letters in 4 ~ 8 or 10 digits To register the ID card along with your ﬁngerprintTo register the PIN number To select PINScreen To Delete IDTo register the PIN number along with your ﬁngerprint Enter PINID List Viewing the ID ListFP REG. Count To Check the Number of Registered FingerprintsALL ID Clear Master ID CLR Duress ModeDuress Mode Not USE Duress Password Enter Duress P/W To delete all registered master IDsARM/DISARM SET Door Open Alarm Time SetupARM/DISARM Open ALR Time User ManagementTo select USE or not USE, and press ENT . J not USE TWO MEN Operation ModeTo move to the TWO MEN Mode item To Check the Number of EventsTo Remove the Time Schedule To Remove ALL EventsExit Button Time setupDoor Contact Sensor Setup Exit Button OutputAUX INPUT#1 Auxiliary Input #1 SetupAuxiliary Input #2 Setup Time SetupCUT OFF Alarm Tamper Alarm Output SetupCUT OFF Output Setup Tamper AlarmARM/DISARM Output Setup Duress Mode Output SetupRD1 ID OK LV1 Door Open Timeout SetupOutput Setup for Level 4 IDs Accessing Reader #1 Output Setup for Level 2 IDs Accessing Reader #1Output Setup for Level 3 IDs Accessing Reader #1 Reader #1 Antipassback Error Output Setup Reader #1 Error Output SetupReader #1 ID Error Output Setup Reader #1 Time Schedule Error Output SetupRD2 ID OK LV2 Output Setup for Level IDS Accessing Reader #212.RD2 ID Error Reader #2 Error Output SetupOutput Setup for Level 4 IDs Accessing Reader #2 Reader #2 ID Error Output Setup14.RD2 APB Error Reader #2 Time Schedule Error Output SetupReader #2 Antipassback Error Output Setup 13.RD2 T/S Error Time SetupTime Unit Unit 1SEC Unit 0.1SEC Advanced setupTime Unit Setup Output Time SCHEDULE+IDUse the 4 Buttons to specify the interval, day Antipassback ModeTime Schedule Setup APB Mode Not USE ALL ClearHoliday Setup Code 10 Holiday Code SetupHoliday Code Code 01RD2 Mode I T/S Reader Mode Time Schedule Reader #1 Mode Time ScheduleReader #2 Mode Time Schedule RD1 Mode I T/ST/S Code ‘00’ means no Time Schedules are to be applied Output Time Schedule SetupVoice Message Time Schedule Voice I T/SCUT OFF SET Input Time Schedule SetupInput CUT OFF Check Setup ID Display Additional featuresEvent Memory Setup Wiegand Output not USE Not USE Wiegand Output SetupVoice Volume Setup Voice VolumeVersion Check  The default setting for One Time Read is not USEONE Time Read Not USE Jnot USE Additional Features ONE Time ReadOutput Test Input TestPress ANY KEY Last UpdateLCD Test Keypad TestReader Test SCANNING… RAM TESTING…Reader Test Memory TestIf the test has succeeded If the test has failed Communication TestFingerprint Module Version Check FailedO , 0 1 N C E X D C I 1 I 2 T P 0 0 0 0 0 0 0 0 0 Input Type SetupInput Type Menu Structure Other informationF4 button Menu Structure of the F3 buttonF3 button Menu Structure of the F4 buttonOther Information Menu Structure of the F5 buttonF5 button F6 button Menu Structure of the F6 buttonMenu Structure of the F8 button Menu Structure of the F7 buttonF10 button Menu Structure of the F9 buttonF9 button Menu Structure of the F10 buttonTTL#1 TTL#2 Default SettingsOutput Settings for Input Sources Duress AlarmOutput Setting for Authentication Trouble Shooting TroubleshootingTroubleshooting Software Buzzer keeps beepingCommunication between Controller and the Host PC failsProduct speciﬁcations Product SpecificationsCorrect disposal of batteries in this product