Samsung SSA-S3010/EXP manual Output Setup for Level IDS Accessing Reader #2, RD2 ID OK LV2

OUTPUT SETUP FOR LEVEL IDS ACCESSING READER #2

Output Setup for the event of Level 1 IDs accessing the READER #2

1.Press the F6 SETUP MENU button.

2. Use the buttons 4 and 6 to move to the RD2 ID OK LV1 item and press ENT .

3.You can make input when the prompt blinks.

•If you enter ‘00’, no output setting is configured.

•Use the keypad to enter the time for each output operation and press ENT . DR : Door relay output

AR : Alarm relay output

T1 : TTL #1 output

T2 : TTL #2 output

BZ : Buzzer output

8.RD2 ID OK LV1
D R	A R	T 1	T 2	B Z
0 3	0 0	0 0	0 0	0 0
8.RD2 ID OK LV1
D R	A R	T 1	T 2	B Z
_ 3	0 0	0 0	0 0	0 0

I/O TIME SETUP

M	 The output time differs, depending on the time unit.
	If the time unit is 0.1 (second), you can specify the value between 0.0 and 9.8 second; if set to 1 (second), you can
	specify between 0 and 98 seconds.
	For the time unit, refer to the ‘Time Unit Setup’ under the advanced setup. (see page 54)
	 If you enter 99 for the value, the product stays in output mode until you change the setting regardless of the time
	unit.

Output Setup for the event of Level 2 IDs accessing the READER #2

1.Press the F6 SETUP MENU button.

2. Use the buttons 4 and 6 to move to the RD2 ID OK LV2 item and press ENT .

•The operation time for each output is the same as in “Output Setup for Level 1 IDs Accessing READER #2” above.

9.RD2 ID OK LV2

D R	A R	T 1	T 2	B Z
0 5	0 0	0 0	0 0	0 0

Output Setup for the event of Level 3 IDs accessing the READER #2

1.Press the F6 SETUP MENU button.

2. Use the buttons 4 and 6 to move to the RD2 ID OK LV3 item and press ENT .

•The operation time for each output is the same as in “Output Setup for Level 1 IDs Accessing READER #2” above.

10.RD2 ID OK LV3

D R	A R	T 1	T 2	B Z
0 5	0 0	0 0	0 0	0 0

English _ 51