Crimestopper Security Products CS-2002DPII manual Operating Instructions, Active Arming

Page 14

OPERATING INSTRUCTIONS

6 BUTTON REMOTE TRANSMITTER:

BANK #1 (Directly Press Buttons)

Button 1: Arm

Button 2: Disarm

Button 3: Aux #1 (Trunk)

Button 4: Panic

Button 5: (Change to BANK #2)

BANK #2* (Press Bank #2 button FIRST, then within 3 seconds Buttons 1-4)

Button 1: Silent Arm (No Chirp)

Button 2: Silent Disarm (No Chirp)

Button 3: Car Locator (5 light flashes, 1 siren chirp

Button 4: Aux #2

ACTIVE ARMING

 

#2

 

UNLOCK

#1

 

LOCK

FLASHLIGHT

#3

BANK #2

PANIC

TRUNK

#4

(AUX.)

 

PANIC

* Remote LED Blinks 3 seconds for Bank #2.

To arm the alarm and lock the doors, press the #1 (Lock Symbol) button on the transmitter. You will hear a single siren chirp and the lights will flash once. The system will arm, the doors will lock and the starter will be disabled if these optional features are installed. The red LED in the vehicle will start flashing after 5 seconds. After a short delay to allow vehicle and electronics to stabilize the system will be completely armed.

ALARM TRIGGERING

If there is an intrusion into the vehicle or hard impact to the body will sound the alarm and flash the lights for 45 seconds. After 45 seconds the system will automatically shut off and re-arm to continue to protect the vehicle. If a door is left open, the unit will cycle a second time and still continue to protect the other un-tampered zones.

DISARMING

Press the #2 (Unlock) button on the transmitter to disarm the alarm. You will hear 2 siren chirps and the lights will flash twice. The LED stops flashing. Door will unlock and dome light will turn on if the options are installed. If you are using the Optional Driver’s priority unlock, then the first press of the unlock button will unlock the driver’s door only and the second press will unlock the passenger door or doors.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CS-2002DPII Table of Contents Installation Cautions & WarningsViolet Wire + Positive Door Trigger WiringGreen Wire Negative Door Trigger Control Module & Component MountingBlack Wire System Chassis Ground Yellow Wire Ignition Switched on and Start +12 VoltsBrown Wire + Siren Output 3 Amp Max PIN Sensor PLUG/HARNESS Blue Power Door Lock WiringPIN Plug White Alarm Status LED Indicator Negative Trigger Doorlock Wiring Separate DRIVER’S Door Unlock Wiring Negative Trigger Door LocksTransmitter Programming Programming Options Chart Option ProgrammingHorn Chirps / Pulses Passive Arming / Chirp CountdownDouble Unlock Pulse Programmable Option Reset Custom Personal Override CodeOperating Instructions Active ArmingProgrammable Silent ARM/DISARM Mode Chirp Defeat PRE-WARNING Shock Protection & Sensor AdjustmentSelective Silent ARM/DISARM Through Remote Control TRUNK/HATCH POP Remote AUX. Output 1, OptionalValet Mode Carjack Protection Features Active RE-ARMING FAIL-SAFE ProtectionLED / Valet Button POD Mounting Under Dash LED / Valet POD Operation & MountingLED / Valet Button POD CS-2002DPII Data Port Diagram BCM

CS-2002DPII specifications

The Crimestopper Security Products CS-2002DPII is a sophisticated and versatile vehicle security system designed to provide reliable protection for car owners. This advanced system combines a range of features and technologies to deter theft and provide peace of mind for users.

One of the standout features of the CS-2002DPII is its two-way paging system, which allows users to communicate with their vehicle remotely. This two-way communication ensures that the owner receives instant notifications if their vehicle is tampered with, as well as confirmation when commands are successfully executed. The remote control can transmit signals up to a staggering 1,500 feet, providing excellent range and allowing users to monitor their vehicle from a significant distance.

The CS-2002DPII incorporates multiple security sensors, including shock and tilt sensors. The shock sensor detects vibrations or impacts, triggering an alarm if unauthorized activity is detected. The tilt sensor monitors the angle of the vehicle, alerting the owner if an attempt is made to tow or jack up the car. This dual-layered approach effectively reduces the likelihood of theft by ensuring that even subtle movements or disturbances trigger a response.

Another notable characteristic of the Crimestopper CS-2002DPII is its built-in immobilizer feature. This technology prevents the engine from starting unless the correct sequence of commands is provided via the remote. This added level of security significantly decreases the chances of a successful theft, as a would-be thief cannot easily bypass this safeguard.

The CS-2002DPII also supports additional features such as keyless entry and programmable features, allowing users to customize their security experience to meet their individual needs. The system is designed to be user-friendly, with intuitive programming and operation, ensuring that car owners can easily manage their vehicle’s security settings.

Furthermore, the construction of the CS-2002DPII is durable, designed to withstand various environmental conditions and offer long-lasting performance. With an emphasis on reliability, the system is engineered to provide optimum security without frequent maintenance interruptions.

In conclusion, the Crimestopper Security Products CS-2002DPII stands out as a top-tier vehicle security solution that merges advanced technology, user-friendly features, and robust construction. Its two-way communication, comprehensive sensors, and engine immobilization make it a formidable deterrent against theft, ensuring that car owners can enjoy peace of mind knowing their vehicle is well-protected.
Top Page Image Contents