Crimestopper Security Products CS-2002DPII manual Programmable Option Reset

Page 13

PROGRAMMABLE OPTION RESET

Follow the steps below to reset ALL OPTION VALUES ON PAGE 10 TO FACTORY DEFAULT SETTINGS.

1.Turn the Ignition ON and press the Override/Program button 5 times. The system will chirp and flash the light 5 times.

2.Immediately press Button #3 (Trunk) on the remote.

3.The system will chirp and flash the light 3 times.

4.Turn off ignition and all programming options should be restored to * values. (See page 10)

CUSTOM PERSONAL OVERRIDE CODE

Custom override allows the user to set a specific number of button presses (2-15) required to perform an emergency override/disarm of the alarm system. This increases the level of security of the system, but you MUST MEMORIZE how many button presses you have changed your system to use or the unit will not disarm in an emergency.

1.Enter programming mode. (See step #1 on page 10)

2.Press program button three times to go to option #3 “Passive Locks/Custom Override”.

3.Press the Button #3 (TRUNK) on the remote transmitter.

4.Press and release the program again the number of times you desire in order to perform emergency disarm on this alarm system. Press the program button 2-15 times only. You need to wait for the siren to chirp the same number of times you pressed the program button to confirm.

To test feature: Trip the alarm system, turn key ON, press the program/valet button 2-15 times as programmed above then continue to HOLD DOWN valet button on the LAST PRESS for 5 seconds. Alarm should disarm. If system does not disarm, then disarm with the remote transmitter and try again. If system still does not disarm or you have forgotten your custom code, then you must use your remote control to disarm the system

CAUTIONARY NOTE!

If you set up this feature and forget your special code, there is no way to disarm the system other than the remote control.

TO CANCEL CUSTOM OVERRIDE CODE follow the Programmable Option Reset steps in the above section.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents CS-2002DPII Installation Cautions & Warnings Table of ContentsGreen Wire Negative Door Trigger WiringViolet Wire + Positive Door Trigger Control Module & Component MountingYellow Wire Ignition Switched on and Start +12 Volts Black Wire System Chassis GroundBrown Wire + Siren Output 3 Amp Max PIN Plug White Alarm Status LED Indicator Power Door Lock WiringPIN Sensor PLUG/HARNESS Blue Negative Trigger Doorlock Wiring Negative Trigger Door Locks Separate DRIVER’S Door Unlock WiringTransmitter Programming Option Programming Programming Options ChartPassive Arming / Chirp Countdown Horn Chirps / PulsesDouble Unlock Pulse Custom Personal Override Code Programmable Option ResetActive Arming Operating InstructionsSelective Silent ARM/DISARM Through Remote Control PRE-WARNING Shock Protection & Sensor AdjustmentProgrammable Silent ARM/DISARM Mode Chirp Defeat TRUNK/HATCH POP Remote AUX. Output 1, OptionalValet Mode Active RE-ARMING FAIL-SAFE Protection Carjack Protection FeaturesLED / Valet Button POD LED / Valet POD Operation & MountingLED / Valet Button POD Mounting Under Dash CS-2002DPII BCM Data Port Diagram

CS-2002DPII specifications

The Crimestopper Security Products CS-2002DPII is a sophisticated and versatile vehicle security system designed to provide reliable protection for car owners. This advanced system combines a range of features and technologies to deter theft and provide peace of mind for users.

One of the standout features of the CS-2002DPII is its two-way paging system, which allows users to communicate with their vehicle remotely. This two-way communication ensures that the owner receives instant notifications if their vehicle is tampered with, as well as confirmation when commands are successfully executed. The remote control can transmit signals up to a staggering 1,500 feet, providing excellent range and allowing users to monitor their vehicle from a significant distance.

The CS-2002DPII incorporates multiple security sensors, including shock and tilt sensors. The shock sensor detects vibrations or impacts, triggering an alarm if unauthorized activity is detected. The tilt sensor monitors the angle of the vehicle, alerting the owner if an attempt is made to tow or jack up the car. This dual-layered approach effectively reduces the likelihood of theft by ensuring that even subtle movements or disturbances trigger a response.

Another notable characteristic of the Crimestopper CS-2002DPII is its built-in immobilizer feature. This technology prevents the engine from starting unless the correct sequence of commands is provided via the remote. This added level of security significantly decreases the chances of a successful theft, as a would-be thief cannot easily bypass this safeguard.

The CS-2002DPII also supports additional features such as keyless entry and programmable features, allowing users to customize their security experience to meet their individual needs. The system is designed to be user-friendly, with intuitive programming and operation, ensuring that car owners can easily manage their vehicle’s security settings.

Furthermore, the construction of the CS-2002DPII is durable, designed to withstand various environmental conditions and offer long-lasting performance. With an emphasis on reliability, the system is engineered to provide optimum security without frequent maintenance interruptions.

In conclusion, the Crimestopper Security Products CS-2002DPII stands out as a top-tier vehicle security solution that merges advanced technology, user-friendly features, and robust construction. Its two-way communication, comprehensive sensors, and engine immobilization make it a formidable deterrent against theft, ensuring that car owners can enjoy peace of mind knowing their vehicle is well-protected.
Top Page Image Contents