Crimestopper Security Products CS-2002DPII Power Door Lock Wiring, PIN Sensor PLUG/HARNESS Blue

Page 6

WIRING

RED WIRE: +12V POWER INPUT (15 amp fuse)

Connect to +12 Volt source with supplied fuse & holder. Recommended location for this connection is at the vehicle battery positive terminal.

14 GA. BROWN WIRE: (On-board Starter Disable Relay)

Cut the 14GA. Brown wire in half. Connect the 2 female terminals to the Male terminals on the control module. Cut the starter (Cranking only) wire on the vehicle. Connect the two brown wires to the 2 ends of the Starter wires. See SYSTEM WIRING DIAGRAM on PAGE 19

2 PIN PLUG (BLUE): PROGRAM/OVERRIDE PUSH BUTTON (LED/Valet Pod)

Mount the LED/Valet Pod on the dash or other accessible location. This button is required when programming options and when an emergency override is required.

2 PIN PLUG (WHITE): ALARM STATUS LED INDICATOR

Mount the LED/Valet Pod in a visible location of the dash or console.

4 PIN SENSOR PLUG/HARNESS (BLUE):

White Wire: Negative Trigger

Blue Wire: Negative Warn-away

Black Wire: Sensor Ground

Red Wire Sensor Power

SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED’s on the shock sensor to assist you in adjusting sensitivity. The Green LED indicates the “Warn Away” level and the Red LED indicates a full alarm shock sensor violation.

POWER DOOR LOCK WIRING

3 PIN DOOR LOCK PLUG (Optional):

GREEN: (-) Negative pulse for LOCK

RED: +12V Coil Power for using relays.

BLUE: (-) Negative pulse for UNLOCK

Hint: Determine the type of locking system the vehicle has before connecting any wires. Incorrect connection could result in damage to the alarm and/or the vehicle’s locking system.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CS-2002DPII Table of Contents Installation Cautions & WarningsViolet Wire + Positive Door Trigger WiringGreen Wire Negative Door Trigger Control Module & Component MountingBlack Wire System Chassis Ground Yellow Wire Ignition Switched on and Start +12 VoltsBrown Wire + Siren Output 3 Amp Max Power Door Lock Wiring PIN Plug White Alarm Status LED IndicatorPIN Sensor PLUG/HARNESS Blue Negative Trigger Doorlock Wiring Separate DRIVER’S Door Unlock Wiring Negative Trigger Door LocksTransmitter Programming Programming Options Chart Option ProgrammingHorn Chirps / Pulses Passive Arming / Chirp CountdownDouble Unlock Pulse Programmable Option Reset Custom Personal Override CodeOperating Instructions Active ArmingProgrammable Silent ARM/DISARM Mode Chirp Defeat PRE-WARNING Shock Protection & Sensor AdjustmentSelective Silent ARM/DISARM Through Remote Control TRUNK/HATCH POP Remote AUX. Output 1, OptionalValet Mode Carjack Protection Features Active RE-ARMING FAIL-SAFE ProtectionLED / Valet POD Operation & Mounting LED / Valet Button PODLED / Valet Button POD Mounting Under Dash CS-2002DPII Data Port Diagram BCM

CS-2002DPII specifications

The Crimestopper Security Products CS-2002DPII is a sophisticated and versatile vehicle security system designed to provide reliable protection for car owners. This advanced system combines a range of features and technologies to deter theft and provide peace of mind for users.

One of the standout features of the CS-2002DPII is its two-way paging system, which allows users to communicate with their vehicle remotely. This two-way communication ensures that the owner receives instant notifications if their vehicle is tampered with, as well as confirmation when commands are successfully executed. The remote control can transmit signals up to a staggering 1,500 feet, providing excellent range and allowing users to monitor their vehicle from a significant distance.

The CS-2002DPII incorporates multiple security sensors, including shock and tilt sensors. The shock sensor detects vibrations or impacts, triggering an alarm if unauthorized activity is detected. The tilt sensor monitors the angle of the vehicle, alerting the owner if an attempt is made to tow or jack up the car. This dual-layered approach effectively reduces the likelihood of theft by ensuring that even subtle movements or disturbances trigger a response.

Another notable characteristic of the Crimestopper CS-2002DPII is its built-in immobilizer feature. This technology prevents the engine from starting unless the correct sequence of commands is provided via the remote. This added level of security significantly decreases the chances of a successful theft, as a would-be thief cannot easily bypass this safeguard.

The CS-2002DPII also supports additional features such as keyless entry and programmable features, allowing users to customize their security experience to meet their individual needs. The system is designed to be user-friendly, with intuitive programming and operation, ensuring that car owners can easily manage their vehicle’s security settings.

Furthermore, the construction of the CS-2002DPII is durable, designed to withstand various environmental conditions and offer long-lasting performance. With an emphasis on reliability, the system is engineered to provide optimum security without frequent maintenance interruptions.

In conclusion, the Crimestopper Security Products CS-2002DPII stands out as a top-tier vehicle security solution that merges advanced technology, user-friendly features, and robust construction. Its two-way communication, comprehensive sensors, and engine immobilization make it a formidable deterrent against theft, ensuring that car owners can enjoy peace of mind knowing their vehicle is well-protected.
Top Page Image Contents