Setting Up the Language Features |
| Setting Up the Audio Options |
|
|
|
Setting Up the Audio Options |
| Setting Up the Display Options |
|
|
|
Using the Subtitle Language
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Select Subtitle using UP/DOWN buttons, then press the RIGHT or ENTER button.
5.Use the UP/DOWN buttons to select the desired language.
-Select “Automatic” if you want the subtitle language to be the same as the language selected as the audio preference.
-Select “Others” if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting.
SUBTITLE LANGUAGE
Automatic
Subtitle
Others
6.Press the ENTER button.
-The language is selected and the screen returns to Language Setup menu.
Note
•If the selected language is not recorded on the disc, the original
•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
Dolby Digital Output
1.PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output.
Note • Be sure to select the correct Digital Output or no audio will be heard.
MPEG-2 Digital Out
1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Note There is no analog audio output when you play DTS sound disc.
Dynamic Compression
1.On : To select dynamic compression.
2.Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Note
•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.
•Manufactured under license from Dolby Laboratories. “Dolby” and the
•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
TV Aspect
Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).
1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
2.4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
|
|
|
|
|
|