TESTING
❒Turn on the circuit breaker and light switch.
Note: Sensor has a 1 1/2 minute warm up pe- riod before it will detect motion.When first turned on wait 1 1/2 minutes.
❒Turn SENSITIVITY to mid position and
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TEST 1 5 10 MIN |
| LO - M - HI | |||||||
|
| SENSITIVITY | |||||||
Avoid aiming the control at:
•Pools of water or objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•
150°
6 ft.
(1.8 m)
30ft.
(9.1m)
Maximum Range | Maximum |
| Coverage Angle |
Thedetectorislesssensitivetomotiondirectlyto- wards it and more sensitive to across motion.
MotionMotion
Sensor
Least Sensitive | Most Sensitive |
❒Walk through the coverage area noting where you are when the lights turn on. Move the sensor head left or right to change the coverage area.
Note: Grasp the sensor only as shown and turn the entire sensor. Any other method may damage the sensor. Do not force it past the stops.
240° | Sensor Aiming |
| |
| Adjustment Angle |
❒SettheSENSITIVITYasneeded.Toomuch sensitivity may increase false triggering.
❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).
SPECIFICATIONS
Range . . . . . . Up to 30 ft. (9.1 m) [varies with surrounding temperature].
Sensing Angle. . . Up to 150°, 240° adjustable
Electrical Load. . . Upto100WattMaximum Incandescent
Sensor Capacity . . Up to 500 Watt (4.1 A.) Maximum
Power Requirements..... 120 VAC, 60 Hz
Operating Modes. . TEST, AUTO, and
MANUAL MODE Time Delay . . . . 1, 5, 10 minutes
DESA Specialty Products reserves the right to discontinue products and to change specifica- tions at any time without incurring any obliga- tion to incorporate new features in products previously sold.