TROUBLESHOOTING GUIDE
SYMPTOM | POSSIBLE CAUSE | |
|
|
|
|
|
|
Light will not | 1. | Light switch is turned off. |
come on. | 2. Bulb is loose or burned out. | |
| 3. | Fuse is blown or circuit breaker |
|
| is turned off. |
| 4. | Daylight |
|
| (recheck after dark). |
| 5. | Incorrect circuit wiring, if this is |
|
| a new installation. |
| 6. | |
|
| desired area. |
|
| |
Light comes on | 1. Light Control may be installed | |
in daylight. |
| in a relatively dark location. |
| 2. | Light Control is in Test. (Set |
|
| control switch to an |
|
| position.) |
|
| |
Light comes on | 1. Light Control may be sensing | |
for no apparent |
| small animals or automobile |
reason. |
| traffic |
| 2. | Sensitivity is set too high. (Re- |
|
| duce sensitivity.) |
|
|
|
SYMPTOM | POSSIBLE CAUSE | ||
|
|
| |
|
|
| |
Light stays on | 1. | The sensor is pointed at nearby | |
continuously. |
| objectsthatcauseheattotrigger | |
|
| the sensor. (Aim the sensor | |
|
| away from nearby objects.) | |
| 2. | The sensor is pointed toward | |
|
| a heat source like an air vent, | |
|
| dryer vent, or | |
|
| ||
|
| sensor.) |
|
|
|
| |
Light flashes | 1. | Heat being reflected from other | |
on and off. |
| objects may be affecting the | |
|
| sensor. | |
| 2. | Light Control is in the Test | |
|
| mode and | warming up. |
|
| (Flashing is | normal under |
|
| these conditions). | |
|
|
|
|
Technical Service
Please call
returning product to store.
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at
DESA Specialty Products
P.O. Box 90004, Bowling Green, KY
ATTN: Technical Service Specialty Products
*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.
No Service Parts Available for this Product
THREE YEAR LIMITED WARRANTY
This is a “Limited Warranty” which gives you specific legal rights.You may also have other rights which vary from state to state or province to province. For a period of three years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.
This warranty covers only DESA Specialty Products assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRE- SENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA Specialty Products FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Proof of purchase is required for warranty claims.