Desa CGR65NA, CGR35NA, CGR50BNA, CGR50NA, CGR65BNA Inserting Glass into Lower Retaining Channel

INSTALLING HEATER

Continued

6. Insert top edge of glass panel into the upper glass retaining channel (see Figure 12).

CAUTION

WARNING ICON G 001

Make sure you insert top edge of glass panels into the upper glass retaining channel. Do not install glass panels with top edge of glass in front of the upper glass retaining channel. Glass panels will not automatically go into the channel. You must guide the glass panels into it. Incorrect installation will damage front of heater due to excess temperatures.

Upper Glass

Retaining Channel

Lower Glass

Retaining Channel

Lower Front Access Area

1

Glass

Panel

2

16

Figure 12 - Inserting Top Edge of Glass Panel into

Upper Glass Retaining Channel

7.Lower glass into lower glass retaining channel. Slide glass panel all the way to the left side.

Note: If you have chipped or cracked a glass panel during installation, do not use. Contact DESA International’s Technical Service Department at 1-800- 323-5190 for a replacement glass panel.

Glass

Panel 1

Lower Glass

Retaining

Channel

2

Figure 13 - Inserting Glass into Lower Retaining Channel

8.Repeat steps 4 through 7 for all glass panels.

9.Reinstall glass guard. Reinstall lower front access panel of heater.

100792