Desa CGR50BNA, CGR35NA, CGR65NA, CGR50NA, CGR65BNA Locating Heater, Heater Clearances

Page 7

INSTALLING HEATER

Continued

LOCATING HEATER

WARNING

WARNING ICON

G 001

Maintain the minimum clearances shown in Figure 3, below. If you can, provide greater clearances.

WARNING ICONG 001 WARNING

Never install the heater

in a mobile home or a recreational vehicle.

where curtains, furniture, clothing, or other flam- mable objects are less than 48 inches from the front, 53 inches from the top, 12 inches from the right side and 6 inches from the left side and back of heater.

directly on carpeting, tile, or other combustible materials other than wood flooring. Place heater on metal or wood panel extending the full width and depth of heater.

as a fireplace insert.

in high traffic areas.

in windy or drafty areas.

CAUTION

WARNING ICON

G 001

If you install the heater in a home garage

heater pilot and burner must be at least 18 inches above floor

locate heater where moving vehicle will not hit it.

For convenience and efficiency, install heater

where there is easy access for operation, inspection, and service.

in coldest part of room.

near an electrical outlet if heater has blower or if you are planning to add blower to heater. See Accessories, page 37 for blower.

 

CEILING

6"

 

Minimum

53"

 

Minimum

Left

Right

 

 

Side

 

 

Side

 

 

 

 

 

 

 

6" Minimum

 

 

 

from Back

 

 

 

12"

 

 

48" Minimum from

Minimum

 

 

 

 

 

Front of Heater

Continued

 

 

Figure 3 - Heater Clearances

7

 

 

100792

Image 7
Contents For Your Safety OWNER’S Operation and Installation ManualWhat to do if YOU Smell GAS Contents Carbon monoxide poisoning may lead to death Safety InformationSafety Information Identification ProductInstallation Items Local Codes Unpacking Product FeaturesCheck GAS Type Heater Clearances Locating HeaterVenting Heater Do not vent heater in any of the following ways see Figure Venting HeaterVenting Heater Proper Size Vent Connecting Heater to Utility Gas Line Connecting to GAS SupplyGas Connection Checking GAS Connections Pressure Testing Gas Supply Piping SystemLocation of Radiants Installing RadiantsInserting Glass Panels Installing Glass PanelInserting Glass into Lower Retaining Channel AIR for Combustion and Ventilation Draft Hood Spillage Test Determining FRESH-AIR Flow for Heater LocationVentilation Air from Outdoors Example 2 Locating Heater in Confined Closed Area Operating Heater For Your Safety Read Before LightingLighting Instructions Viewing Pilot Shutting Off Heater Manual Lighting ProcedureBlower Operation To Turn OFF GAS to AppliancePilot Flame Pattern Inspecting Pilot and Burner FlameBurner Flame Pattern Correct Burner Flame Pattern Cleaning and Maintenance Observed Possible Problem Cause Remedy Trouble ShootingSee Changing Burner See Removing Control TROUBLE- ShootingLighting Instructions Top Ing statement atRemoving Control Valve and Burner Tube Service ProceduresRemoving Burner Changing Burner Orifice Blower Wiring DiagramModel Technical ServiceService Hints 35,000 BTU/Hr 50,000 BTU/HrParts Under Warranty Ordering Replacement Parts CentralsParts Not Under Warranty Valve GA5010 AccessoriesBlower Assembly Illustrated Parts ListCabinet Assembly Burner Assembly Thermocouple Interrupter 100792 100792 Limited Warranty Comfort Glow Vented Natural GAS Heaters Warranty Information