Using POWERbot
You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the | button for more than | WARNING |
3 seconds |
|
|
•When POWERbot is not used for 30 minutes, power will turn off automatically.
Starting Auto clean mode
Press and release this button. The POWERbot moves and cleans automatically until it cleans an entire space once.
✻✻Stop cleaning: Press and release the 
button
Starting Spot clean mode
Press and release this button. The POWERbot cleans a localized area intensely.
Recharging
ffRecharging
You can command POWERbot to recharge at the docking station automatically while it is cleaning by pressing this button.