Information codes
1 | The information | 2 | If a code appears, |
| codes below |
| turn off the |
| appear on the |
| emergency |
| display panel |
| switch and check |
|
|
| the instructions |
|
|
| below and take |
|
|
| appropriate action |
3 The information code will disappear when you turn on the emergency switch
Information codes | Checklist |
|
|
| The POWERbot is caught, stuck, trapped or lifted while |
| moving around. |
| ffTurn off the emergency switch and move the POWERbot to another |
| area. |
|
|
| Foreign matter caught in the Power brush. |
| ffTurn off the emergency switch and remove the foreign matter from the |
| Power brush. |
|
|
| Foreign matter caught in the left Driving wheel. |
| ffTurn off the emergency switch and remove the foreign matter from the |
| Driving wheel. |
|
|
| Foreign matter caught in the right Driving wheel. |
| ffTurn off the emergency switch and remove the foreign matter from the |
| Driving wheel. |
|
|
| Bumper sensor needs to be checked. |
| ffTurn off the emergency switch and turn it back on. |
| ffContact a service center if information code does not disappear. |
|
|
| Foreign matter accumulated on the obstacle sensor. |
| ffTurn off the emergency switch and clean the front and rear sensor |
| with a soft cloth. |
|
|
| Foreign matter accumulated on the cliff sensor. |
| ffTurn off the emergency switch and clean the cliff sensor with a soft |
| cloth. |
|
|