DISASSEMBLE THE FREEZER DRAWER
1.Push the upper drawer in completely.
2.Remove the tilting pocket ( 1 ) by pulling on both brackets ( 2 ) upward at the same time.
1
2
3.Take out the lower basket ( 3 ) by lifting the basket up from rail system.
3
ASSEMBLE THE FREEZER DRAWER
To reattach the freezer drawer, assemble parts in reverse order.
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make fi nal adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
Insert a fl
4.Remove four 10 mm
5.Lift the freezer door up from the rails.
10_ setting up
Both control levers must be touching the fl oor CAUTION to avoid possible personal injury or property
damage because of tipping.
If the right side is lower, perform the same procedure, but with the right control lever.
2015. 5. 7. 8:10 |