REATTACHING THE REFRIGERATOR DOORS
To reattach the fridge doors, assemble parts in reverse order.
1.The Water Line must be fully inserted to the center of transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.
Type A | Type B |
| Dispenser |
Center of Transparent coupler | The Guide Lines |
|
When reassembling it, be sure to connect the CAUTION wire harness.
If it is not connected, the Flex Room does not work.
4.Remove 2 hex head bolts from sides with a socket wrench (10 mm)
5.Lift up the Flex door from the rails.
01 SETTING UP
DISASSEMBLE THE FLEX DOOR
1.Take out the Flex Zone ( 1 ) by lifting it up.
1
2.Take off the cover ( 2 ) w/harness with a flat- blade screwdriver
Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing
completely and can cause frost
2
3.Press the locking tab and separate the Wire Connector.
ASSEMBLE THE FLEX DOOR
To reattach the fl ex door,assemble parts in reverse order.
Be sure to connect the Flex Door Wire CAUTION Connector.
If it is not connected, the Flex Room does not work.
setting up _09
2015. 5. 7. 8:10 |