Setting up your refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung Refrigerator. We hope you enjoy the
Selecting the best location for the Refrigerator
•A location with easy access to the water supply.
•A location without direct exposure to sunlight.
•A location with level (or nearly level) flooring.
•A location with enough space for the Refrigerator doors to open easily.
•Allow sufficient space to the right, left, back and top for air circulation.
If the Refrigerator does not have enough space, the internal cooling system may not work properly.
•Please ensure that appliance can be moved freely in the event of maintenance & service.
•Do not install the Refrigerator where the temperature will go below 50 ºF (10 ºC).
B
A
E
C | D |
Depth “A” | 858 mm |
|
|
Width “B” | 908 mm |
|
|
Height “C” | 1740 mm |
|
|
Overall Height “D” | 1774 mm |
|
|
Depth “E” | 920 mm |
|
|
50 mm
|
|
|
| 01 |
| 125° | 125° |
| SETTING |
| 1578 mm | 335 mm | ||
|
| |||
|
|
| ||
| 908 mm |
| UP | |
|
|
|
| |
mm | 108 mm |
|
| |
| 46 mm | 1233 mm |
| |
748 |
| 1346 mm | ||
|
|
Each measurement based on the design dimension, so it may differ depending on the measuring method.
When moving your refrigerator
To prevent fl oor damage be sure the front leveling legs are in the up position(above the fl oor).
Refer to ‘ADJUSTING THE DOORS’ in the manual (at page 10)
FLOORING
For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the fl ooring. This surface should be strong enough to support a fully loaded refrigerator. To protect the fi nish of the fl ooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving, be sure to pull the unit straight out and push back in straight.
setting up _07
2015. 5. 7. 8:10 |