Napoleon Fireplaces 1600C-1 specifications Installation When Installed with Blower KIT EP63

INSTALLATION WHEN INSTALLED WITH BLOWER KIT EP63

For reduced clearances installation must comply with NFPA 211or CAN/CSA-B365.

Alcove installation

Model 1600C-1 may be installed into an alcove having a depth of not more than 4 feet and a height of at least 7 feet, when using a listed double wall connector that is rated for a minimum 12” clearance to combustible material.

The minimum clearances are as shown.

Alcove installation

Listed single wall chimney connector

		Flue configuration
	Type 1	Horizontal	Vertical
	A	16”	16”
FROM
	B*	10”	16”
UNIT
	C	11”	11”
	D	25”	25”
FROM
	E	...	18”
PIPE
	F	...	18”

*A 18 in. Minimum clearance should be maintained from combustible wall to the chimney connector.

16"

16"

16"

4footmax

84"

Ilustratedwith.75"hearthpad.

Double walled connectors listed for a minimum clearance of 12” or less from combustible materials must be used to achieve the following clearances.

		Flue configuration
	Type 2	Horizontal	Vertical
	A	16”	16”
FROM
	B	10”	10”
UNIT
	C	11”	11”
	D	25”	25”
FROM
	E	...	16”

Walls shall not extend from front of unit when installed

in the alcove configuration.

Stove installation

PIPE
F	...	12”

If the stove is to be installed on a combustible floor, it must be p l a c e d o n a a p p r o v e d non-combustible hearth pad, t h a t e x t e n d s 8 " ( 2 0 0 m m ) beyond the stove sides and back, and 18" (455mm) to the front.

8"

8"

18"

8"

F	B	D
		A

C

E

C

6