Vanguard Heating VMH10TN Product Identification, Local Codes, Features, Unpacking

Page 4

PRODUCT

IDENTIFICATION

Fireplace

Cabinet

Screen

Logs

 

 

Control Knob

 

 

Ignitor Button

LOCAL CODES

Figure 1 - Vent-Free Natural Gas Compact Fireplace

Install and use fireplace with care. Follow all local codes. In the absence of local

 

 

 

 

codes, use the latest edition of The National Fuel Gas Code ANSI Z223, also

 

 

known as NFPA 54*.

 

 

*Available from:

 

 

American National Standards Institute, Inc.

 

 

1430 Broadway

 

 

New York, NY 10018

 

 

National Fire Protection Association, Inc.

 

 

Batterymarch Park

 

 

Quincy, MA 02269

 

PRODUCT

Safety Pilot

 

This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS).

 

FEATURES

 

The ODS/pilot is a required feature for vent-free room fireplaces. The ODS/pilot

 

 

shuts off the fireplace if there is not enough fresh air.

 

 

Piezo Ignition System

 

 

This fireplace has a piezo ignitor. This system requires no matches, batteries, or

 

 

other sources to light fireplace.

 

 

Thermostatic Heat Control

 

 

This fireplace has a thermostat sensing bulb and a control valve. The thermostat

 

 

will automatically modulate the heat output to maintain a consistent room tempera-

 

 

ture. This results in greater fireplace comfort. This can also result in lower gas bills.

 

UNPACKING

1. Remove log box and fireplace from carton. The hood is not attached.

 

 

 

 

2. Remove all protective packaging applied to fireplace for shipment.

 

 

3. Make sure your fireplace includes one hardware packet.

 

 

4. Check fireplace for any shipping damage. If fireplace is damaged, promptly

 

 

inform dealer where you bought fireplace.

4

 

 

 

 

 

 

 

 

103670

Image 4
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety InformationSafety Features Product IdentificationLocal Codes ProductInstalling Log AssemblyAssembling Fireplace Ventilation AIR for CombustionProviding Adequate Ventilation Determining FRESH-AIR Flow for Fireplace Location AIR forDetermining if You Have a Confined or Unconfined Space Ventilation AIR Tion and ventilation air by one of the methods describedCable local codes Ventilation Air From Inside BuildingAIR for Combustion and Ventilation Ventilation Air From OutdoorsInstallation Installation ItemsCheck GAS Type Locating FireplaceInstallation Installing BUILT-IN Fireplace InstallationMantel Clearances for Built-In Installation Gas Supply,Optional Mantel Installation Attaching Brass Trim to FireplaceAssembling Brass Trim Brass trim shipped with mantel Attaching Wood Base to Solid FloorConnecting To GASSupply Follow all local codesConnecting Fireplace to GAS Supply Installation Items NeededPressure Testing GAS Supply Piping System Pressure Testing Fireplace GAS ConnectionsChecking GAS ConnectionsFireplace Operating Fireplace PilotShutting Off Fireplace Shutting Off Burner Only pilot stays litInspecting Burner Pilot Flame PatternBurner Flame Pattern Correct Burner Flame PatternCleaning and Maintenance Trouble Shooting Observed Possible Problem Cause RemedyODS/PILOT and Burner CabinetSee Cleaning TROUBLE- Shooting Ing statement at TopService ReplacementTechnical HintsAccessories VMH10TN Parts List Model VMH10TNLimited Warranty Warranty InformationVENT-FREE Natural GAS Compact Classic HEARTHâ Fireplace