Trane RT-PRC010-EN manual Integrated Comfort System ICS, SimplifyingThe Comfort System

Features and Benefits

Integrated

Rooftop

Systems:

Profitable,

Simple

Integrated Comfort™

System (ICS)

Trane integrated rooftop systems make design and installation of rooftop comfort systems profitable and easy.The Integrated Comfort™ system (ICS) improves job profit and increases job control by combiningTrane rooftop units and aTracer® building management system.This integrated system provides total building comfort and control.The primary motivation for building owners/ managers in making the purchasing decision of HVAC controls system is no longer just saving energy; it is having the ability to automate their facilities and the convenience of interface to control systems.

SimplifyingThe Comfort System

AtTrane, we think new technology and innovation should bring you more capabilities, more flexibility and at the same time be able to give you equipment and systems that are easier to use, easier to install, commission and service.The Rooftop Integrated Comfort system saves you time and money by simplifying system design and system installation.When used withTrane’s DDC/ VAV boxes (or VariTrane™), system balancing almost goes away because each VAV box is commission and tested before it leaves the factory. All the status information and editing data from the rooftop units, VAV boxes, lighting, exhaust and other auxiliary equipment is available fromTracer for control, monitoring and service support of your

facility.Tracer, a family of building automation products fromTrane, is designed with robust, application specific software packages to minimize custom programming requirements and enable system setup and control through simple editing of parameters in the standard applications software. Should you select an Integrated Comfort system for your facility, the accountability for equipment, automation and controls isTrane’s, Trane’s, andTrane’s!

The IntelliPak® rooftop, as a part of an Integrated Comfort system, provides powerful maintenance monitoring, control and reporting capabilities.The Tracer places the rooftop in the appropriate operating mode for operation for: system on/off, night setback, demand limiting , setpoint adjustment based on outside parameters and much more. Up to 48 different unit diagnostic conditions can be monitored throughTracer to let you know about things like: sensor failures, loss of supply airflow, and a compressor trip out. Further, the addition of Building Management Network software offers remote scanning, automatic receipt of alarms, and easy dial-up access to over 100 variousTracer sites across town or across the country.

Typical points available throughTracer:

IntelliPak Rooftops monitoring points available throughTracer

•all active Rooftop diagnostics

•history of last 20 unit diagnostics

•all system setpoints

•system sensor inputs

•supply fan mode and status

•inlet guide vane position/VFD speed

•unit heat/cool mode

•exhaust fan status

•exhaust damper position

•economizer position, minimum position setpoint, economizing setpoint

•on/off status of each compressor

•refrigerant evaporator and saturated condenser temperatures

•hydronic heat valve position

•electric heat stage status

•ventilation override mode status

Tracer control points for IntelliPak® Rooftops

•cooling and heating setpoints

•zone setpoint offsets for use with demand limiting

•VAV discharge air setpoints

•supply air pressure setpoint

•space pressure setpoint

•zone and outdoor temperature values

•cooling and heating enable/disable

•economizer enable/disable

•economizer setpoint

•economizer minimum position

•activation of ventilation override modes

•diagnostics reset

•unit priority shutdown

IntelliPak Rooftops set-up and configuration information throughTracer

•supply fan mode

•configuration of supply air reset

•ventilation override mode configuration

•default system setpoint values

•sensor calibration offsets

6 RT-PRC010-EN