Remote Fan Operation, Vent Control | Trane PTAC-SVX01C-EN specification

Operation

Table 16. User inputs

Input Function

TB1

+Remote display communications link (+)

-Remote display communications link (-)

TB2

EN	Energy management
	system input

VT	Ventilation input

OReversing valve (class 2 thermostat)

GL	Low fan speed (class 2
	thermostat)

GH	High speed fan (class 2
	thermostat)

YCool (class 2 thermostat)

W Heat (class 2 thermostat)

R 24VAC common1

C	Ground2

RF	Remote fan relay output

Notes:

1.Connection to R enables input functions W, Y, GL, GH, O,VT, and/or EN.

2.Connect 24VAC, 3VA maximum Remote Fan Control Relay to RF and C

Remote Fan Operation

PTACs can operate a remote fan to provide conditioned air to additional rooms or areas that are not well ventilated. The remote fan operates any time the PTAC indoor fan is operating.

The remote fan requires a 24 VAC, 3 VA maximum relay that connects to the control board RF and C terminal user inputs. The relay and remote fan are field supplied. Refer to the wiring diagrams section for wiring details.

Vent Control

Vent control draws fresh air into the conditioned area to provide ventilation when the indoor fan is operating. However, this may increase heating cooling loads and operating costs.

To obtain access to the vent control, remove the cabinet front and locate the vent control lever on the left side of the chassis. Push the vent control lever up to open the vent or down to close.

The unit ships with the vent door closed and secured by a screw.

CAUTION Freezing Temperatures!

Do not allow liquid refrigerant to contact skin. If it does, treat the injury similar to frostbite. Slowly warm the affected area with lukewarm water and seek immediate medical attention. Direct contact with liquid refrigerant may cause minor or moderate injury.

Air Discharge Grille

The discharge grille can be adjusted to expel air at either a 15° or 40° (40° default) angle. Figure 18.

To change the discharge air airflow angle:

1.Remove the front cabinet.

2.Position the front cabinet so that the backside is accessible.

3.Remove the four screws which secure the discharge air grille to the cabinet front with a phillips- head screwdriver. See Figure 31.

4.Rotate the grille 180° end-for- end.

5.Reinstall the screws securing the discharge air grille to the cabinet front. Reinstall the cabinet front on the unit.

Screws

Figure 18. Discharge air grille

22	PTAC-SVX01C-EN

PTAC-SVX01C-EN specifications

The Trane PTAC-SVX01C-EN is a cutting-edge Packaged Terminal Air Conditioner (PTAC) designed to provide optimal temperature control, energy efficiency, and user comfort in a variety of settings, including hotels, apartments, and office buildings. This unit stands out with its robust features and advanced technologies, making it a reliable choice for meeting diverse heating and cooling needs.

At the heart of the Trane PTAC-SVX01C-EN is its innovative design, which combines powerful performance with quiet operation. This unit utilizes a high-efficiency compressor that ensures rapid cooling and heating, providing ideal comfort regardless of the external climate. With a capacity range suitable for smaller spaces, the PTAC delivers strong performance while maintaining energy efficiency, thus reducing operational costs over time.

One of the key characteristics of the PTAC-SVX01C-EN is its user-friendly interface. The intuitive controls allow users to effortlessly adjust temperature settings, fan speeds, and modes of operation, including cooling, heating, and fan only. This flexibility enhances user comfort while optimizing energy consumption. Additionally, the unit features a programmable timer, enabling users to schedule operation according to their specific needs, further conserving energy when spaces are unoccupied.

The unit's Quiet Operation Technology minimizes noise levels, making it an ideal choice for environments where peace and quiet are paramount. This feature is particularly beneficial in hospitality settings, where guests expect a tranquil atmosphere. The PTAC is engineered to provide ample airflow while minimizing sound, creating a pleasant indoor environment.

Another standout feature of the Trane PTAC-SVX01C-EN is its advanced air filtration system. The integrated filter effectively captures dust, allergens, and other airborne particles, promoting a cleaner and healthier living environment. This is particularly essential for individuals with allergy sensitivities or respiratory issues.

Durability is also a hallmark of the PTAC-SVX01C-EN. Built with high-quality materials, it is designed to withstand the demands of continuous operation while requiring minimal maintenance. The unit's sleek and compact design allows for easy installation in various locations, ensuring versatility without sacrificing performance.

In summary, the Trane PTAC-SVX01C-EN represents a perfect blend of efficiency, comfort, and innovative technology. Its user-friendly controls, quiet operation, and advanced air filtration make it a leading choice for those seeking reliable climate control solutions in residential and commercial spaces alike. Whether for heating or cooling, the Trane PTAC-SVX01C-EN is engineered to deliver exceptional performance and lasting dependability.