Honeywell VISTA-21IPSIA manual FIXED-WORD Display Keypad

Page 10

About The Keypads (Cont’d)

FIXED-WORD DISPLAY KEYPAD

AWAY: All burglary zones, interior and perimeter, are armed.

STAY: Perimeter burglary zones, such as protected windows and doors, are armed.

NIGHT-STAY:NIGHT and STAY indicators both light when perimeter burglary zones plus pre-selected interior zones (set by the installer) are armed.

INSTANT: Entry delay is turned off:

Lit with STAY = Instant mode Lit with AWAY = Maximum mode

AWAY NIGHT NO AC

BYPASS PHONE TEST NOT READY ALARM STAY CHIME BAT

FIRE CHECK INSTANT CANCELED

6150disp

FIXED-WORD DISPLAY

BYPASS: This appears when one or more burglary protection zones have been bypassed.

NOT READY: Appears when burglary portion of the system is not ready for arming (due to open protection zones). The system is ready to arm when this message disappears and the READY indicator light comes on.

NO AC: Appears when AC power has been cut off. System is operating on backup battery power.

AC: Appears when AC power is present.

CHIME: Appears when the chime feature is activated.

BAT: Low battery condition in a wireless sensor (if zone number displayed) or low system battery (if no zone number displayed).

ALARM: Appears when an intrusion has been detected and the system is armed (also appears during a fire alarm or audible emergency alarm). Accompanied by the protection zone in alarm.

CHECK: Appears when a malfunction is discovered in the system at any time, or if an open is detected in a fire zone at any time, or a fault in a DAY/NIGHT burglary zone during a disarmed period. Accompanied by a display of zone number in trouble.

FIRE: Appears when a fire alarm is generated. Accompanied by a display of the zone in alarm.

A FIRE display also appears when a fire alarm is manually activated, accompanied by a display of the fire emergency key zone number.

CANCELED: Appears when an alarm has been silenced by the Code + OFF sequence and will remain on until another Code + OFF sequence is keyed.

– 10 –

Image 10

Contents Ademco Vista Series About This Manual Table of Contents Table of Contents Introduction System OverviewSystem Basics System Overview cont’d Function Keys Using the Voice Message Center if Voice Keypad is installedPaging Feature SchedulingAbout The Keypads General InformationAbout The Keypads cont’d Armed Ready Message MICFIXED-WORD Display Keypad Functions of the Keypads Armed Ready Message MICFunctions of the Keypads cont’d MIC Entry Delay Entry/Exit DelaysExit Delay Exit Alarms Entry/Exit Delays cont’dExit Error Conditions To turn the Voice Status feature on/off # Using the ∗ Key to Display and Announce System StatusChecking For Open Zones Maximum Mode Arms Entire System, Entry Delay Off Instant Mode Arms Perimeter Only, Entry Delay OffAway Mode Arms Entire System, Entry Delay On Arming the SystemArming the System cont’d Arming CommandsMode Press these keys… Keypad Confirms By… Quick ArmingSingle Button Step Arming Single Button ArmingKey First Press Second Press Third Press To arm in the Away mode KeyswitchUsing the Keyswitch To arm in the Stay modeDisarming and Silencing Alarms Using the OFF keyUsing the Bypass Key Bypassing Protection ZonesBypassing Protection Zones cont’d Quick BypassUsing the Chime Mode Chime ModeUsing the Voice Chime Date and Time Setting the Date and TimeViewing the Current Date and Time Panic Keys Using Panic KeysThis Function Sends This Signal With This Sounding… To activate a Panic FunctionMacro Key Programming & Usage About Macro KeysMacro Key Programming & Usage cont’d Using a Programmed Macro KeyExample of Macro Programming To Activate Devices Using Device CommandsAbout Device Commands To Deactivate DevicesPaging Feature About Automatic PagingAbout Manual Paging Paging Feature cont’dLatch Key Paging About Security Codes Security Codes & Authority LevelsAuthority Level Definitions How to Assign Security Codes and Attributes Security Codes & Authority Levels cont’dAbout Accessing Partitions Accessing Other PartitionsGoto Command and Multi-Partition Arming Using the GoTo Command Accessing Other Partitions cont’dMulti-Partition Arming Common Zone Operation Scheduling About SchedulingScheduling cont’d Viewing the Event Log Event Logging ProceduresAbout Event Logging Understanding the Type of Event DisplayedEvent Logging Procedures cont’d STAY/INSTANTTesting the System About Testing the SystemIf there are wireless sensors* in your system, the Check Trouble ConditionsRcvr Jam Alarm 1xx Fault 1xx CheckTrouble Conditions cont’d Or CheckBusy-Standby Or no ACLong Rng Trbl Maintaining Your System Fire Alarm System This Section Applies only to Residential SystemsIndividual Keys Fire Alarm System cont’dOr Key Pairs Kitchen Dining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System FunctionsSummary of Audible/Visual Notifications Fixed-Word Display KeypadsSummary of A/V Notifications cont’d Alpha Display KeypadsFCC Part Regulatory Statements and WarningsIndustry Canada Ringer Equivalence Number Notice Regulatory Statements cont’dIndustrie Canada System Features Log System Features Log cont’d User SetupUser Setup cont’d Paging SetupList of Output Devices OWNER’S Insurance Premium Credit Request Cont Page Page Limitations of this System ÊK14490V1Š