Bypassing Protection Zones
Using the BYPASS Key
Use this key when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first.
Vent Zones: Your system may have certain windows set as “vent” zones, which are automatically bypassed if left open when arming the system (you do not need to manually bypass them). However, if a vent zone window is closed after arming, it becomes protected and will cause an alarm if opened again while the system is armed.
When bypassing zones:
•The system must be disarmed before you can bypass zones.
•Bypassed zones are unprotected and will not cause an alarm if violated.
•The system will not allow fire zones to be bypassed.
•Zones are automatically unbypassed when the system is disarmed.
1. + 6 BYPASS + zone numbers (see below)
(Security Code)
Enter the
2.When finished, the keypad will momentarily display a "Bypass" message for each bypassed zone number. Wait for all bypassed zones to be displayed.
Arm the system as usual. When armed, the arming message is displayed with “ZONE BYPASSED.”
To display bypassed zones prior to arming, enter your security code and press the [6] BYPASS key.
Alpha Display:
DISARMED
HIT ∗ FOR FAULTS
NOT READY
Alpha Display:
DISARMED BYPASS READY TO ARM
Alpha Display:
ARMED: STAY ZONE BYPASSED
Typical armed display after bypassing zones.
– 22 –