Axis Communications P5544 Controls on the Live View, Go to Overview mode, Audio Controls

Page 11

AXIS P5544 PTZ Dome Network Camera

Accessing the Product

Controls on the Live View Page

The viewer toolbar on the Live View page provides the following controls:

Go to Overview mode.

Click the View size button to reduce the size of the displayed video.

Play a live media stream.

Pause the live media stream.

Start recording the video stream. An ongoing recording is indicated by a red marker. To stop recording, click the button again. The recording is saved to the location specified in the AMC Control Panel.

Display video in Full-screen mode. Press ESC (Escape) on the computer keyboard to cancel full-screen mode.

Take a Snapshot of the video image. The image is saved to the location specified in the AMC Control Panel. Enable this button from Setup > Live View Config > Action Buttons.

Zoom bar — (Normal mode only) Use the slider to zoom in and out, or click on the arrows to zoom in and out in steps.

The viewer toolbar can be disabled from Setup > Live View Config.

The following tabs contain additional settings:

Displays the available Preset Positions. A preset position is a predefined view that can be used to quickly steer the camera to a specific location. Click on a preset to go to that position. For more information, see Preset Positions, on page 27.

Displays the available Stream Profiles. A stream profile is a set of pre-configured stream settings including resolution, compression, frame rate and overlay settings. Click on a profile to stream live video using that profile. For more information, see Stream Profiles, on page 18.

The Audio tab is displayed if audio is enabled. See Audio Controls, on page 11.

The Actions tab displays:

•Manual trigger buttons, see page 12.

•User-defined links, see page 25.

•Output buttons. These are used to control external devices connected to the Axis product’s output ports See page 25.

If PTZ Control Queue is enabled, the time each user is in control of the PTZ functionality is limited. Click the buttons to enter or exit the queue. The PTZ Control Queue is set up under PTZ > Control Queue, see page 29.

Note

The Live View page can be customized to meet specific requirements and user preferences. If the Live View page has been customized, some of the functions and controls described here may differ from those displayed in your own Live View page.

Audio Controls

The controls available from the Audio tab on the Live View page are used to control the speakers and microphone connected to the computer. The buttons are only visible when audio is enabled.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis P5544 PTZ Dome Network Camera Intellectual Property Rights SafetyAbout This Document LiabilityAxis P5544 PTZ Dome Network Camera Table of ContentsPerformance Considerations For technical specifications, see ConnectorsHardware Overview Hardware OverviewColor Indication LED IndicatorsMidspan LED Indicators Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserClick Create self-signed certificate Access from the InternetSet the Root Password Network TCP/IP AdvancedLive View Overview ModeNormal Mode Audio Controls Go to Overview modeControls on the Live View To show the manual trigger buttons in the Live View Go to Setup EventsManual Trigger Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductSetting Up the Product Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImageAudio Input Audio SettingsPrivacy Mask Audio ModesG711 G726 Audio OutputAudio Clips Live View Config Default Viewer for BrowsersLive View Config Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P5544 PTZ Dome Network Camera Gatekeeper Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomLimits Guard TourOsdi Zones AdvancedControls Operator Same as administrator but with lower priorityControl Queue Motion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RulePTZ Control Recurrences RecipientsSchedules Axis P5544 PTZ Dome Network Camera Continuous Recording RecordingsRecordings Recording ListAxis P5544 PTZ Dome Network Camera Users System OptionsSystem Options SecurityAudio Support Date & TimeIeee IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card Port Status MaintenancePorts & Devices PortsSystem Overview Open PTZ Calibration from System Options MaintenanceSupport Support OverviewPlain Config Reset to Factory Default SettingsScripting File UploadFunction Pin Specifications Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately DC power input Connection diagramChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Problems with the H.264 format Product is accessible locally but not externallyProblems uploading files Video and image problems, generalSetup Video & Audio Camera Settings PTZ problemsNo audio SettingsStorage and disk management problems Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Maintenance Installation aidsMemory Power ConnectorsPerformance Considerations Ver M1.15 Axis P5544 PTZ Dome Network Camera

P5544 specifications

The Axis Communications P5544 is a robust and versatile network camera designed for high-performance surveillance in various environments. With its advanced features and cutting-edge technologies, it provides exceptional video quality and reliability, making it a popular choice for businesses and organizations looking to enhance their security systems.

One of the standout features of the P5544 is its high-resolution imaging capabilities. The camera offers 720p HD video quality, ensuring clear and detailed footage, even in challenging lighting conditions. This high resolution is particularly beneficial for capturing essential details such as faces or license plates, which can be crucial in security scenarios.

The P5544 is equipped with a powerful zoom lens, allowing users to zoom in on specific areas of interest without compromising image quality. With a 22x optical zoom, operators can easily focus on distant subjects or wide scenes, providing flexibility in monitoring various locations. This feature, combined with the camera's pan and tilt functionality, enables comprehensive coverage of a designated area.

In addition to its impressive optical capabilities, the Axis P5544 incorporates advanced image enhancement technologies. It features Axis' Wide Dynamic Range (WDR) technology, which helps in handling difficult lighting conditions, such as bright sunlight and deep shadows. This ensures that video footage remains clear and detailed in various lighting scenarios, enhancing overall situational awareness.

The camera is designed for durability and adaptability, making it suitable for both indoor and outdoor use. It is housed in a rugged casing that meets IK10 vandal resistance standards, providing protection against physical damage. This robustness ensures that the camera can endure harsh weather conditions, making it a reliable option for various installations.

Moreover, the Axis P5544 supports Power over Ethernet (PoE), simplifying installation by requiring only a single cable for power and data transmission. This not only reduces the complexity of the setup but also contributes to a cleaner and more organized deployment.

In conclusion, the Axis Communications P5544 is a powerful surveillance tool that combines high-definition imagery, versatile zoom capabilities, advanced image processing, and a durable design. Its features make it an ideal choice for businesses seeking reliable security solutions that can adapt to various environments and challenges. With the P5544, organizations can enhance their monitoring capabilities, improving overall safety and security.
Top Page Image Contents