Axis Communications P5544 user manual Ports & Devices, Maintenance, Port Status, PTZ Calibration

Page 47

AXIS P5544 PTZ Dome Network Camera

System Options

Ports & Devices

I/O Ports

The Axis product provides four configurable input and output ports for connection of external devices. A multi-connector cable (available from Axis) is required when connecting external devices, see Multi-Connector Cable (sold separately), on page 50.

The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Note

A multi-connector cable (available from Axis) is required when connecting I/O devices to the Axis product. See Multi-Connector Cable (sold separately), on page 50.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 49.

To test the product’s PTZ mechanics, click Test under PTZ Status.

To calibrate the PTZ functionality, click Calibrate PTZ. See PTZ Calibration.

For information about firmware upgrade, see Upgrading the Firmware, on page 52.

PTZ Calibration

The camera’s PTZ mechanics must be calibrated before use. PTZ calibration aligns the overview mode and normal mode coordinate systems so that each point in the overview is mapped to the correct point in the normal mode image.

The PTZ Calibration tool starts automatically the first time the product is accessed. If required, PTZ calibration can also be accessed from System Options > Maintenance.

Important

A new PTZ calibration is recommended if the top cover has been removed and remounted, for example when replacing the SD card.

To calibrate the PTZ mechanics:

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Axis P5544 PTZ Dome Network Camera Intellectual Property Rights SafetyAbout This Document LiabilityAxis P5544 PTZ Dome Network Camera Table of ContentsPerformance Considerations For technical specifications, see ConnectorsHardware Overview Hardware OverviewColor Indication LED IndicatorsMidspan LED Indicators Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserClick Create self-signed certificate Access from the InternetSet the Root Password Network TCP/IP AdvancedLive View Overview ModeNormal Mode Audio Controls Go to Overview modeControls on the Live View To show the manual trigger buttons in the Live View Go to Setup EventsManual Trigger Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductSetting Up the Product Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImageAudio Input Audio SettingsPrivacy Mask Audio ModesG711 G726 Audio OutputAudio Clips Live View Config Default Viewer for BrowsersLive View Config Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P5544 PTZ Dome Network Camera Gatekeeper Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomLimits Guard TourOsdi Zones AdvancedControls Operator Same as administrator but with lower priorityControl Queue Motion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RulePTZ Control Recurrences RecipientsSchedules Axis P5544 PTZ Dome Network Camera Continuous Recording RecordingsRecordings Recording ListAxis P5544 PTZ Dome Network Camera Users System OptionsSystem Options SecurityAudio Support Date & TimeIeee IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card Port Status MaintenancePorts & Devices PortsSystem Overview Open PTZ Calibration from System Options MaintenanceSupport Support OverviewPlain Config Reset to Factory Default SettingsScripting File UploadFunction Pin Specifications Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately DC power input Connection diagramChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Problems with the H.264 format Product is accessible locally but not externallyProblems uploading files Video and image problems, generalSetup Video & Audio Camera Settings PTZ problemsNo audio SettingsStorage and disk management problems Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Maintenance Installation aidsMemory Power ConnectorsPerformance Considerations Ver M1.15 Axis P5544 PTZ Dome Network Camera

P5544 specifications

The Axis Communications P5544 is a robust and versatile network camera designed for high-performance surveillance in various environments. With its advanced features and cutting-edge technologies, it provides exceptional video quality and reliability, making it a popular choice for businesses and organizations looking to enhance their security systems.

One of the standout features of the P5544 is its high-resolution imaging capabilities. The camera offers 720p HD video quality, ensuring clear and detailed footage, even in challenging lighting conditions. This high resolution is particularly beneficial for capturing essential details such as faces or license plates, which can be crucial in security scenarios.

The P5544 is equipped with a powerful zoom lens, allowing users to zoom in on specific areas of interest without compromising image quality. With a 22x optical zoom, operators can easily focus on distant subjects or wide scenes, providing flexibility in monitoring various locations. This feature, combined with the camera's pan and tilt functionality, enables comprehensive coverage of a designated area.

In addition to its impressive optical capabilities, the Axis P5544 incorporates advanced image enhancement technologies. It features Axis' Wide Dynamic Range (WDR) technology, which helps in handling difficult lighting conditions, such as bright sunlight and deep shadows. This ensures that video footage remains clear and detailed in various lighting scenarios, enhancing overall situational awareness.

The camera is designed for durability and adaptability, making it suitable for both indoor and outdoor use. It is housed in a rugged casing that meets IK10 vandal resistance standards, providing protection against physical damage. This robustness ensures that the camera can endure harsh weather conditions, making it a reliable option for various installations.

Moreover, the Axis P5544 supports Power over Ethernet (PoE), simplifying installation by requiring only a single cable for power and data transmission. This not only reduces the complexity of the setup but also contributes to a cleaner and more organized deployment.

In conclusion, the Axis Communications P5544 is a powerful surveillance tool that combines high-definition imagery, versatile zoom capabilities, advanced image processing, and a durable design. Its features make it an ideal choice for businesses seeking reliable security solutions that can adapt to various environments and challenges. With the P5544, organizations can enhance their monitoring capabilities, improving overall safety and security.
Top Page Image Contents