Axis Communications P5544 user manual Events

Page 33

AXIS P5544 PTZ Dome Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see Applications, on page 32.

•Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 31.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 30.

•Hardware

-Fan — trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance notifications.

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 47.

-Manual Trigger — trigger the rule using the Manual Trigger buttons in the Live View page, see Manual Trigger, on page 12. This can for example be used to validate actions during product installation and configuration.

•PTZ

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

•System

-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 35. This can for example be used to upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 35.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Axis P5544 PTZ Dome Network Camera About This Document SafetyLiability Intellectual Property RightsAxis P5544 PTZ Dome Network Camera Table of ContentsPerformance Considerations Hardware Overview ConnectorsHardware Overview For technical specifications, seeLED Indicators Midspan LED IndicatorsColor Indication Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateLive View Overview ModeNormal Mode Go to Overview mode Controls on the Live ViewAudio Controls Go to Setup Events Manual TriggerTo show the manual trigger buttons in the Live View Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterStream Profiles Click Save to apply the new settingsImage 264Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video & Audio Video Stream and select the Image tabPrivacy Mask Audio SettingsAudio Modes Audio InputG711 G726 Audio OutputAudio Clips Default Viewer for Browsers Live View ConfigLive View Config Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P5544 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom GatekeeperOsdi Zones Guard TourAdvanced LimitsOperator Same as administrator but with lower priority Control QueueControls Detectors Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsSetting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Recipients SchedulesRecurrences Axis P5544 PTZ Dome Network Camera Recordings RecordingsRecording List Continuous RecordingAxis P5544 PTZ Dome Network Camera System Options System OptionsSecurity UsersDate & Time IeeeAudio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Go to System Options Storage and click SD CardGo to System Options Storage Click Network Share Ports & Devices MaintenancePorts Port StatusSupport Open PTZ Calibration from System Options MaintenanceSupport Overview System OverviewScripting Reset to Factory Default SettingsFile Upload Plain ConfigMulti-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications DC power input Connection diagramTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallySetup Video & Audio Camera Settings Video and image problems, generalPTZ problems Problems uploading filesStorage and disk management problems SettingsMotion Detection triggers unexpectedly No audioTechnical Specifications Technical SpecificationsMemory Power Maintenance Installation aidsConnectors Function/group Specifications Network SecurityPerformance Considerations Ver M1.15 Axis P5544 PTZ Dome Network Camera

P5544 specifications

The Axis Communications P5544 is a robust and versatile network camera designed for high-performance surveillance in various environments. With its advanced features and cutting-edge technologies, it provides exceptional video quality and reliability, making it a popular choice for businesses and organizations looking to enhance their security systems.

One of the standout features of the P5544 is its high-resolution imaging capabilities. The camera offers 720p HD video quality, ensuring clear and detailed footage, even in challenging lighting conditions. This high resolution is particularly beneficial for capturing essential details such as faces or license plates, which can be crucial in security scenarios.

The P5544 is equipped with a powerful zoom lens, allowing users to zoom in on specific areas of interest without compromising image quality. With a 22x optical zoom, operators can easily focus on distant subjects or wide scenes, providing flexibility in monitoring various locations. This feature, combined with the camera's pan and tilt functionality, enables comprehensive coverage of a designated area.

In addition to its impressive optical capabilities, the Axis P5544 incorporates advanced image enhancement technologies. It features Axis' Wide Dynamic Range (WDR) technology, which helps in handling difficult lighting conditions, such as bright sunlight and deep shadows. This ensures that video footage remains clear and detailed in various lighting scenarios, enhancing overall situational awareness.

The camera is designed for durability and adaptability, making it suitable for both indoor and outdoor use. It is housed in a rugged casing that meets IK10 vandal resistance standards, providing protection against physical damage. This robustness ensures that the camera can endure harsh weather conditions, making it a reliable option for various installations.

Moreover, the Axis P5544 supports Power over Ethernet (PoE), simplifying installation by requiring only a single cable for power and data transmission. This not only reduces the complexity of the setup but also contributes to a cleaner and more organized deployment.

In conclusion, the Axis Communications P5544 is a powerful surveillance tool that combines high-definition imagery, versatile zoom capabilities, advanced image processing, and a durable design. Its features make it an ideal choice for businesses seeking reliable security solutions that can adapt to various environments and challenges. With the P5544, organizations can enhance their monitoring capabilities, improving overall safety and security.
Top Page Image Contents