Tokens
This section outlines how to add and delete token cards that allow an alternate method for users to turn the system on and off via a prox reader enabled Keypad or an external reader. The system can also be configured to automaticall open a door if it has been fitted with an electric door lock. You should discuss this feature with your installer for more details on your particular installation.
A token is a small plastic tag card that has a unique ID. A user can place the token card in front of a keypad that has a
Access > Token >
Add Token | MENU |
This menu allows a Master user the ability to add a new token for for those users that have been assigned to the same area(s) as the Master user.
Enter programming mode (PIN + MENU) then,
1.Enter [MENU] + [1] + [2] + [0].
A list of users will display on the keypad.
2.Use the [] and [↓] keys to select the user that you want to add a token for, then press [OK] to select.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
Press , OK or MENU
3.If you are using a keypad with built in reader the system will prompt you to present the token to the keypad. Once the token is presented the keypad we beep and return to the menu.
To Add token for U001 JOHN SMITH swipe new token
4.If you are learning the token via an external reader the
system will prompt you to select the reader to learn from. Use the [] and [↓] keys to select the reader and then repeat step 3 presenting the token to the external reader.
A Master user can only delete a PIN for those users that have been assigned to the same area(s) as the Master user. A Master user cannot delete their own PIN.
Access > Token >
Delete Token | MENU |
This menu allows a Master user the ability to delete a token for those users that have been assigned to the same area(s) as the Master user.
Enter programming mode (PIN + MENU) then,
Solution 64 
User Guide
1.Enter [MENU] + [1] + [2] + [1].
A list of users will display on the keypad.
2.Use the [] and [↓] keys to select the user who’s token you want to delete, then press [OK] to select.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
Press , OK or MENU
3.When prompted press the [OK] key to confirm token deletion.
Access > Token >
Token Status | MENU |
This menu allows a Master user the ability to identify a token which has been programmed into the system. Only tokens that have been assigned to the same area(s) as the Master user cn be identified.
Enter programming mode (PIN + MENU) then,
1.Enter [MENU] + [1] + [2] + [2].
The system will prompt you to present the token to the keypad.
2.Once the token is presented the system will display the owner of the token.
Token belongs to ur002
DEBBIE SMITH
Press OK or MENU
RF Keyfob
This section outlines how to add and delete RF keyfobs that allow an alternate method for users to turn an area(s) on and off. The RF Keyfob must be compatible with the RF Receiver that has been installed by the security company.
Access > RF Keyfob >
Add Keyfob | MENU |
This menu allows the security installer or a master user to program the user’s keyfob ID number.
Enter programming mode (PIN + MENU) then,
1.Enter [MENU] + [1] + [3] + [0].
A list of users will display on the keypad.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
PRESS , OK or MENU
Bosch Security Systems |
| 09/06 |
| BLCC110U | 11 |
|
|